Noise Levels in Iron Triangle, Richmond, CA | Find Quiet Neighborhoods With Our Sound Map
57 dBA
Average noise across Iron Triangle
Normal conversation an arm’s length away
5,208
Residents above the EPA 55 dBA threshold
53% of Iron Triangle residents
77 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Iron Triangle at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 5,208 Iron Triangle residents, or 53.3%, live above that level. By land area, 52.5% of Iron Triangle is above 55 dBA.
Average noise levels for Iron Triangle residents, grouped by direction from the center of Iron Triangle. Eastern Iron Triangle carries the highest population-weighted average; Southern Iron Triangle carries the lowest. Just 40% of residents in Southern Iron Triangle live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Eastern Iron Triangle.
Central Iron Triangle
56.5 dBA · Moderate-loud
Normal conversation an arm’s length away
42% of people above 55 dBA
QuietLoud
Eastern Iron Triangle
58.6 dBA · Loud
Normal conversation an arm’s length away
66% of people above 55 dBA
QuietLoud
Northern Iron Triangle
57.4 dBA · Moderate-loud
Normal conversation an arm’s length away
78% of people above 55 dBA
QuietLoud
Southern Iron Triangle
54.9 dBA · Moderate-loud
Quiet office to normal conversation
40% of people above 55 dBA
QuietLoud
Western Iron Triangle
57.8 dBA · Moderate-loud
Normal conversation an arm’s length away
65% of people above 55 dBA
QuietLoud
Eastern Iron Triangle sounds about 29% louder than Southern Iron Triangle to the human ear, a 3.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Richmond Pkwy do you need to be?
Richmond Pkwy produces an estimated 65 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
65 dBA
Busy restaurant
165 ft
51 dBA
Quiet office to normal conversation
330 ft
43 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 3% of Iron Triangle sits under tree canopy (much lighter than most neighborhoods) and roughly 65% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Iron Triangle. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
San Francisco Bay Oakland International (OAK) sits southeast of Iron Triangle. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Iron Triangle, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Iron Triangle
The bar chart below shows the share of Iron Triangle residents in each noise band. About 40% of residents live below the EPA's 55 dBA threshold, and roughly 12% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Iron Triangle Compares
Iron Triangle sits at the louder end of the spectrum. Below: how Iron Triangle's average outdoor noise and share of residents above the EPA threshold compare with North and East, Cow Hollow, Berkeley Hills, and Lynn-Highland Park.
Average noise level (dBA)
Iron Triangle's 56.6 dBA pop-weighted average is at the louder end of the spectrum. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Iron Triangle because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 53.3% of Iron Triangle residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 52.5% of Iron Triangle's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.
What This Means if You're Moving to Iron Triangle
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Richmond Pkwy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 3% of Iron Triangle is under tree cover (much lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. San Francisco Bay Oakland International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
