Noise Levels in Linwood, Columbus, OH | Find Quiet Neighborhoods With Our Sound Map
58 dBA
Average noise across Linwood
Normal conversation an arm’s length away
1,368
Residents above the EPA 55 dBA threshold
50% of Linwood residents
80 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Linwood at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,368 Linwood residents, or 50.4%, live above that level. By land area, 44.4% of Linwood is above 55 dBA.
Average noise levels for Linwood residents, grouped by direction from the center of Linwood. Central Linwood carries the highest population-weighted average; Northern Linwood carries the lowest. Just 0% of residents in Northern Linwood live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Linwood.
Central Linwood
63.9 dBA · Loud
Busy restaurant
82% of people above 55 dBA
QuietLoud
Eastern Linwood
58.4 dBA · Loud
Normal conversation an arm’s length away
30% of people above 55 dBA
QuietLoud
Northern Linwood
48.1 dBA · Mostly quiet
Quiet office
0% of people above 55 dBA
QuietLoud
Western Linwood
53.8 dBA · Moderate-loud
Quiet office to normal conversation
41% of people above 55 dBA
QuietLoud
Central Linwood sounds about 199% louder than Northern Linwood to the human ear, a 15.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Ir 70 E do you need to be?
Ir 70 E produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.
At source
77 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
57 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
43 dBA
Quiet suburban street at night
½ mile
36 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 14% of Linwood sits under tree canopy (about average for neighborhoods) and roughly 44% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Linwood. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
John Glenn Columbus International (CMH) sits north of Linwood. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Linwood, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Linwood
The bar chart below shows the share of Linwood residents in each noise band. About 48% of residents live below the EPA's 55 dBA threshold, and roughly 34% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Linwood Compares
Linwood sits at the quieter end of the spectrum. Below: how Linwood's average outdoor noise and share of residents above the EPA threshold compare with Livingston-McNaughten, Southern Orchards, Leawood, and king-lincoln-bronzeville-columbus-oh.
Average noise level (dBA)
Linwood's 58.2 dBA pop-weighted average is at the quieter end of the spectrum. Ohio as a whole averages 51.1 dBA and the U.S. averages 52.0 dBA. Both are lower than Linwood because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 50.4% of Linwood residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 44.4% of Linwood's footprint sits above 55 dBA, against a Ohio average of 26.4% and a national average of 28.1%.
What This Means if You're Moving to Linwood
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Ir 70 E and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 14% of Linwood is under tree cover (about average for neighborhoods), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. John Glenn Columbus International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
