Noise Levels in Loring Park, Minneapolis, MN | Find Quiet Neighborhoods With Our Sound Map

62 dBA
Average noise across Loring Park
Busy restaurant
6,821
Residents above the EPA 55 dBA threshold
76% of Loring Park residents
81 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Loring Park at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Loring Park, Minneapolis, MN Map of Noise Levels in Loring Park
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 6,821 Loring Park residents, or 75.7%, live above that level. By land area, 78.7% of Loring Park is above 55 dBA.

See how noise in Loring Park compares to similar-sized neighborhoods.

Noise by Part of Loring Park

Average noise levels for Loring Park residents, grouped by direction from the center of Loring Park. Southern Loring Park carries the highest population-weighted average; Northern Loring Park carries the lowest. Just 84% of residents in Northern Loring Park live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Southern Loring Park.

Central Loring Park

61.6 dBA · Loud
Busy restaurant

71% of people above 55 dBA

QuietLoud

Eastern Loring Park

62.9 dBA · Loud
Busy restaurant

64% of people above 55 dBA

QuietLoud

Northern Loring Park

59.1 dBA · Loud
Normal conversation an arm’s length away

84% of people above 55 dBA

QuietLoud

Southern Loring Park

68.6 dBA · Loud
Highway traffic 50 ft away

100% of people above 55 dBA

QuietLoud

Western Loring Park

61.9 dBA · Loud
Busy restaurant

100% of people above 55 dBA

QuietLoud

Southern Loring Park sounds about 93% louder than Northern Loring Park to the human ear, a 9.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from State Hwy 55 do you need to be?

State Hwy 55 produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet office
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 3% of Loring Park sits under tree canopy (much lighter than most neighborhoods) and roughly 78% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Airport Noise

Minneapolis-St Paul International/Wold-Chamberlain (MSP) sits southeast of Loring Park. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Loring Park, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Loring Park

The bar chart below shows the share of Loring Park residents in each noise band. About 5% of residents live below the EPA's 55 dBA threshold, and roughly 42% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Loring Park Compares

Loring Park sits the highest among the peer group. Below: how Loring Park's average outdoor noise and share of residents above the EPA threshold compare with Jordan, Saint Anthony, Cedar-Riverside, and Downtown West.

Average noise level (dBA)

Loring Park's 61.8 dBA pop-weighted average is the highest among the peer group. Minnesota as a whole averages 53.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Loring Park because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 75.7% of Loring Park residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 78.7% of Loring Park's footprint sits above 55 dBA, against a Minnesota average of 31.0% and a national average of 28.1%.

What This Means if You're Moving to Loring Park

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from State Hwy 55 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 3% of Loring Park is under tree cover (much lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Minneapolis-St Paul International/Wold-Chamberlain's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.