Noise Levels in Lynbrook, NY | Find Quiet Neighborhoods With Our Sound Map

58 dBA
Average noise across Lynbrook
Normal conversation an arm’s length away
13,744
Residents above the EPA 55 dBA threshold
76% of Lynbrook residents
84 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Lynbrook at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Lynbrook, NY Map of Noise Levels in Lynbrook
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 13,744 Lynbrook residents, or 75.5%, live above that level. By land area, 77.6% of Lynbrook is above 55 dBA.

See how noise in Lynbrook compares to similar-sized cities.

Noise by Part of Lynbrook

Average noise levels for Lynbrook residents, grouped by direction from the center of Lynbrook. Central Lynbrook carries the highest population-weighted average; Northern Lynbrook carries the lowest. Just 68% of residents in Northern Lynbrook live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Central Lynbrook.

Central Lynbrook

61.2 dBA · Loud
Busy restaurant

80% of people above 55 dBA

QuietLoud

Eastern Lynbrook

59.0 dBA · Loud
Normal conversation an arm’s length away

87% of people above 55 dBA

QuietLoud

Northern Lynbrook

56.9 dBA · Moderate-loud
Normal conversation an arm’s length away

68% of people above 55 dBA

QuietLoud

Southern Lynbrook

57.7 dBA · Moderate-loud
Normal conversation an arm’s length away

72% of people above 55 dBA

QuietLoud

Western Lynbrook

59.1 dBA · Loud
Normal conversation an arm’s length away

72% of people above 55 dBA

QuietLoud

Central Lynbrook sounds about 35% louder than Northern Lynbrook to the human ear, a 4.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Peninsula Blvd do you need to be?

Peninsula Blvd produces an estimated 68 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
68 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
47 dBA
Quiet office
660 ft
39 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 18% of Lynbrook sits under tree canopy (lighter than most cities) and roughly 54% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Lynbrook. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

John F Kennedy International (JFK) sits west of Lynbrook. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Lynbrook, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Lynbrook

The bar chart below shows the share of Lynbrook residents in each noise band. About 18% of residents live below the EPA's 55 dBA threshold, and roughly 26% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Lynbrook Compares

Lynbrook sits the highest among the peer group. Below: how Lynbrook's average outdoor noise and share of residents above the EPA threshold compare with Franklin Square, Mineola, West Hempstead, and Merrick.

Average noise level (dBA)

Lynbrook's 58.5 dBA pop-weighted average is the highest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than Lynbrook because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 75.5% of Lynbrook residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 77.6% of Lynbrook's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to Lynbrook

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Peninsula Blvd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 18% of Lynbrook is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. John F Kennedy International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.