Noise Levels in 04543, ME | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across 04543
Quiet suburban street at night
222
Residents above the EPA 55 dBA threshold
10% of 04543 residents
68 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across 04543 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
04543, ME Map of Noise Levels in 04543
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 222 04543 residents, or 9.9%, live above that level. By land area, 16.6% of 04543 is above 55 dBA.

See how noise in 04543 compares to similar-sized zip codes.

Noise by Part of 04543

Average noise levels for 04543 residents, grouped by direction from the center of 04543. Northern 04543 carries the highest population-weighted average; Eastern 04543 carries the lowest. Just 1% of residents in Eastern 04543 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern 04543.

Eastern 04543

36.4 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Northern 04543

49.9 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Southern 04543

41.6 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Western 04543

49.8 dBA · Mostly quiet
Quiet office

19% of people above 55 dBA

QuietLoud

Northern 04543 sounds about 155% louder than Eastern 04543 to the human ear, a 13.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 04543 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US 1B Major collector 59.5 65
US-1 Principal arterial 62.2 63
St Rte 129 Major collector 58.9 59
Rd Inv 15 00500 Minor collector 53.5 55
Rd Inv 15 00503 Local 55.0 55

How far back from US 1B do you need to be?

US 1B produces an estimated 65 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
65 dBA
Busy restaurant
165 ft
52 dBA
Quiet office to normal conversation
330 ft
44 dBA
Quiet suburban street at night
660 ft
37 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 62% of 04543 sits under tree canopy (much heavier than most zip codes) and roughly 10% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 04543

The bar chart below shows the share of 04543 residents in each noise band. About 86% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 04543 Compares

04543 sits the highest among the peer group. Below: how 04543's average outdoor noise and share of residents above the EPA threshold compare with 04553, 04555, 04537, and 04353.

Average noise level (dBA)

04543's 45.0 dBA pop-weighted average is the highest among the peer group. Maine as a whole averages 48.0 dBA and the U.S. averages 52.0 dBA. Both are lower than 04543 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 9.9% of 04543 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 16.6% of 04543's footprint sits above 55 dBA, against a Maine average of 17.5% and a national average of 28.1%.

What This Means if You're Moving to 04543

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US 1B and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 62% of 04543 is under tree cover (much heavier than most zip codes), and the dominant land cover is mixed forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.