Noise Levels in 14468, NY | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across 14468
Quiet office
1,252
Residents above the EPA 55 dBA threshold
7% of 14468 residents
71 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across 14468 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
14468, NY Map of Noise Levels in 14468
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,252 14468 residents, or 6.8%, live above that level. By land area, 9.0% of 14468 is above 55 dBA.

See how noise in 14468 compares to similar-sized zip codes.

Noise by Part of 14468

Average noise levels for 14468 residents, grouped by direction from the center of 14468. Central 14468 carries the highest population-weighted average; Western 14468 carries the lowest. Just 6% of residents in Western 14468 live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Central 14468.

Central 14468

49.1 dBA · Mostly quiet
Quiet office

5% of people above 55 dBA

QuietLoud

Eastern 14468

48.1 dBA · Mostly quiet
Quiet office

8% of people above 55 dBA

QuietLoud

Northern 14468

48.5 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Southern 14468

47.5 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Western 14468

46.2 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Central 14468 sounds about 22% louder than Western 14468 to the human ear, a 2.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 14468 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Lake Ontario St Pkwy Minor arterial 60.9 71
Wilder Rd Minor arterial 59.0 59
Frisbee Hill Rd Major collector 59.0 59
North Ave Minor arterial 58.0 58
N Greece Rd Major collector 57.9 58

How far back from Lake Ontario St Pkwy do you need to be?

Lake Ontario St Pkwy produces an estimated 71 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
71 dBA
Highway traffic 50 ft away
165 ft
57 dBA
Normal conversation an arm’s length away
330 ft
50 dBA
Quiet office
660 ft
42 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 24% of 14468 sits under tree canopy (about average for zip codes) and roughly 16% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 14468

The bar chart below shows the share of 14468 residents in each noise band. About 98% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 14468 Compares

14468 sits the lowest among the peer group. Below: how 14468's average outdoor noise and share of residents above the EPA threshold compare with 14559, 14420, 14617, and 14615.

Average noise level (dBA)

14468's 47.6 dBA pop-weighted average is the lowest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than 14468 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.8% of 14468 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 9.0% of 14468's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to 14468

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Lake Ontario St Pkwy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 24% of 14468 is under tree cover (about average for zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.