Noise Levels in 17271, PA | Find Quiet Neighborhoods With Our Sound Map

53 dBA
Average noise across 17271
Quiet office to normal conversation
60
Residents above the EPA 55 dBA threshold
15% of 17271 residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 17271 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
17271, PA Map of Noise Levels in 17271
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 60 17271 residents, or 14.6%, live above that level. By land area, 32.7% of 17271 is above 55 dBA.

See how noise in 17271 compares to similar-sized zip codes.

Noise by Part of 17271

Average noise levels for 17271 residents, grouped by direction from the center of 17271. Northern 17271 carries the highest population-weighted average; Southern 17271 carries the lowest. Just 8% of residents in Southern 17271 live in blocks above the EPA's 55 dBA threshold, about half the share in Northern 17271.

Central 17271

56.5 dBA · Moderate-loud
Normal conversation an arm’s length away

45% of people above 55 dBA

QuietLoud

Eastern 17271

47.3 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Northern 17271

61.0 dBA · Loud
Normal conversation an arm’s length away

22% of people above 55 dBA

QuietLoud

Southern 17271

45.6 dBA · Mostly quiet
Quiet suburban street at night

8% of people above 55 dBA

QuietLoud

Western 17271

59.2 dBA · Loud
Normal conversation an arm’s length away

20% of people above 55 dBA

QuietLoud

Northern 17271 sounds about 191% louder than Southern 17271 to the human ear, a 15.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 17271 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Mainline Tpke Interstate 75.0 75
Ckie Mountain Green Rd Local 58.0 58
Ckia Creek Rd Local 58.0 58
Path Valley Rd Minor arterial 53.0 53
Ckik Stony Rd Local 53.0 53

How far back from Mainline Tpke do you need to be?

Mainline Tpke produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 14% of 17271 sits under tree canopy (lighter than most zip codes) and roughly 2% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 17271

The bar chart below shows the share of 17271 residents in each noise band. About 50% of residents live below the EPA's 55 dBA threshold, and roughly 31% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 17271 Compares

17271 sits the highest among the peer group. Below: how 17271's average outdoor noise and share of residents above the EPA threshold compare with 17215, 17220, 17219, and 17221.

Average noise level (dBA)

17271's 53.1 dBA pop-weighted average is the highest among the peer group. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than 17271 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 14.6% of 17271 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 32.7% of 17271's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to 17271

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Mainline Tpke and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 14% of 17271 is under tree cover (lighter than most zip codes), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.