Noise Levels in 24522, VA | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across 24522
Quiet suburban street at night
828
Residents above the EPA 55 dBA threshold
8% of 24522 residents
83 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across 24522 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
24522, VA Map of Noise Levels in 24522
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 828 24522 residents, or 8.5%, live above that level. By land area, 13.6% of 24522 is above 55 dBA.

See how noise in 24522 compares to similar-sized zip codes.

Noise by Part of 24522

Average noise levels for 24522 residents, grouped by direction from the center of 24522. Central 24522 carries the highest population-weighted average; Eastern 24522 carries the lowest. Just 2% of residents in Eastern 24522 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central 24522.

Central 24522

50.1 dBA · Moderate
Quiet office

13% of people above 55 dBA

QuietLoud

Eastern 24522

39.5 dBA · Quiet
Soft rainfall

2% of people above 55 dBA

QuietLoud

Northern 24522

41.3 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Southern 24522

46.5 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Western 24522

47.7 dBA · Mostly quiet
Quiet office

14% of people above 55 dBA

QuietLoud

Central 24522 sounds about 108% louder than Eastern 24522 to the human ear, a 10.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 83 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet office.

At source
83 dBA
Food blender at arm’s length
165 ft
70 dBA
Highway traffic 50 ft away
330 ft
63 dBA
Busy restaurant
660 ft
56 dBA
Quiet office to normal conversation
¼ mile
48 dBA
Quiet office
½ mile
41 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 47% of 24522 sits under tree canopy (heavier than most zip codes) and roughly 4% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of 24522. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across 24522

The bar chart below shows the share of 24522 residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 24522 Compares

24522 sits the lowest among the peer group. Below: how 24522's average outdoor noise and share of residents above the EPA threshold compare with 24521, 24588, 24504, and 24538.

Average noise level (dBA)

24522's 44.6 dBA pop-weighted average is the lowest among the peer group. Virginia as a whole averages 52.8 dBA and the U.S. averages 52.0 dBA. Both are lower than 24522 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 8.5% of 24522 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 13.6% of 24522's footprint sits above 55 dBA, against a Virginia average of 30.0% and a national average of 28.1%.

What This Means if You're Moving to 24522

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 47% of 24522 is under tree cover (heavier than most zip codes), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.