Noise Levels in 33706, FL | Find Quiet Neighborhoods With Our Sound Map
51 dBA
Average noise across 33706
Quiet office to normal conversation
3,188
Residents above the EPA 55 dBA threshold
25% of 33706 residents
66 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across 33706 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,188 33706 residents, or 24.7%, live above that level. By land area, 35.5% of 33706 is above 55 dBA.
Average noise levels for 33706 residents, grouped by direction from the center of 33706. Western 33706 carries the highest population-weighted average; Northern 33706 carries the lowest. Just 21% of residents in Northern 33706 live in blocks above the EPA's 55 dBA threshold, about half the share in Western 33706.
Central 33706
50.9 dBA · Moderate
Quiet office
28% of people above 55 dBA
QuietLoud
Eastern 33706
52.8 dBA · Moderate
Quiet office to normal conversation
30% of people above 55 dBA
QuietLoud
Northern 33706
50.4 dBA · Moderate
Quiet office
21% of people above 55 dBA
QuietLoud
Southern 33706
52.0 dBA · Moderate
Quiet office to normal conversation
27% of people above 55 dBA
QuietLoud
Western 33706
54.8 dBA · Moderate-loud
Quiet office to normal conversation
58% of people above 55 dBA
QuietLoud
Western 33706 sounds about 36% louder than Northern 33706 to the human ear, a 4.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Gulf Blvd do you need to be?
Gulf Blvd produces an estimated 63 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
63 dBA
Busy restaurant
165 ft
49 dBA
Quiet office
330 ft
41 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 7% of 33706 sits under tree canopy (lighter than most zip codes) and roughly 65% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Tampa International (TPA) sits northeast of 33706. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of 33706, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across 33706
The bar chart below shows the share of 33706 residents in each noise band. About 79% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How 33706 Compares
33706 sits the lowest among the peer group. Below: how 33706's average outdoor noise and share of residents above the EPA threshold compare with 33708, 33704, 33778, and 33773.
Average noise level (dBA)
33706's 51.2 dBA pop-weighted average is the lowest among the peer group. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than 33706 because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 24.7% of 33706 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 35.5% of 33706's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.
What This Means if You're Moving to 33706
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Gulf Blvd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 7% of 33706 is under tree cover (lighter than most zip codes), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Tampa International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
