Noise Levels in 37327, TN | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across 37327
Quiet suburban street at night
788
Residents above the EPA 55 dBA threshold
6% of 37327 residents
77 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 37327 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
37327, TN Map of Noise Levels in 37327
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 788 37327 residents, or 6.5%, live above that level. By land area, 10.5% of 37327 is above 55 dBA.

See how noise in 37327 compares to similar-sized zip codes.

Noise by Part of 37327

Average noise levels for 37327 residents, grouped by direction from the center of 37327. Eastern 37327 carries the highest population-weighted average; Western 37327 carries the lowest. Just 1% of residents in Western 37327 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern 37327.

Eastern 37327

47.3 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Northern 37327

45.9 dBA · Mostly quiet
Quiet suburban street at night

5% of people above 55 dBA

QuietLoud

Southern 37327

46.3 dBA · Mostly quiet
Quiet office

8% of people above 55 dBA

QuietLoud

Western 37327

39.3 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Eastern 37327 sounds about 74% louder than Western 37327 to the human ear, a 8.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 37327 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
State Hwy 111 Freeway 62.9 72
A290 Local 55.0 55
A310 Local 55.0 55
A309 Local 55.0 55
A308 Local 55.0 55

How far back from State Hwy 111 do you need to be?

State Hwy 111 produces an estimated 72 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
72 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
56 dBA
Normal conversation an arm’s length away
660 ft
51 dBA
Quiet office
¼ mile
45 dBA
Quiet suburban street at night
½ mile
39 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 42% of 37327 sits under tree canopy (heavier than most zip codes) and roughly 5% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 37327

The bar chart below shows the share of 37327 residents in each noise band. About 93% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 37327 Compares

37327 sits at the quieter end of the spectrum. Below: how 37327's average outdoor noise and share of residents above the EPA threshold compare with 37397, 37367, 37341, and 37377.

Average noise level (dBA)

37327's 45.7 dBA pop-weighted average is at the quieter end of the spectrum. Tennessee as a whole averages 49.2 dBA and the U.S. averages 52.0 dBA. Both are lower than 37327 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.5% of 37327 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 10.5% of 37327's footprint sits above 55 dBA, against a Tennessee average of 18.7% and a national average of 28.1%.

What This Means if You're Moving to 37327

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from State Hwy 111 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 42% of 37327 is under tree cover (heavier than most zip codes), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.