Noise Levels in 48879, MI | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across 48879
Quiet suburban street at night
1,100
Residents above the EPA 55 dBA threshold
7% of 48879 residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 48879 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
48879, MI Map of Noise Levels in 48879
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,100 48879 residents, or 6.7%, live above that level. By land area, 10.1% of 48879 is above 55 dBA.

See how noise in 48879 compares to similar-sized zip codes.

Noise by Part of 48879

Average noise levels for 48879 residents, grouped by direction from the center of 48879. Central 48879 carries the highest population-weighted average; Western 48879 carries the lowest. Just 0% of residents in Western 48879 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central 48879.

Central 48879

52.7 dBA · Moderate
Quiet office to normal conversation

18% of people above 55 dBA

QuietLoud

Eastern 48879

47.2 dBA · Mostly quiet
Quiet office

11% of people above 55 dBA

QuietLoud

Northern 48879

45.7 dBA · Mostly quiet
Quiet suburban street at night

6% of people above 55 dBA

QuietLoud

Southern 48879

43.4 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Western 48879

36.7 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Central 48879 sounds about 203% louder than Western 48879 to the human ear, a 16.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 48879 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
N Us-127 Freeway 70.2 74
N US Hwy 127 Freeway 63.7 69
US Hwy 127 Freeway 66.1 69
US-127 BR Principal arterial 63.6 64
E Price Rd Major collector 54.6 61

How far back from N Us-127 do you need to be?

N Us-127 produces an estimated 74 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
74 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
40 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 22% of 48879 sits under tree canopy (about average for zip codes) and roughly 15% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 48879

The bar chart below shows the share of 48879 residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 48879 Compares

48879 sits the lowest among the peer group. Below: how 48879's average outdoor noise and share of residents above the EPA threshold compare with 48820, 48837, 48912, and 48906.

Average noise level (dBA)

48879's 45.1 dBA pop-weighted average is the lowest among the peer group. Michigan as a whole averages 49.3 dBA and the U.S. averages 52.0 dBA. Both are lower than 48879 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.7% of 48879 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 10.1% of 48879's footprint sits above 55 dBA, against a Michigan average of 19.9% and a national average of 28.1%.

What This Means if You're Moving to 48879

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from N Us-127 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 22% of 48879 is under tree cover (about average for zip codes), and the dominant land cover is cultivated cropland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.