Noise Levels in 53575, WI | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across 53575
Quiet office to normal conversation
3,945
Residents above the EPA 55 dBA threshold
24% of 53575 residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 53575 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
53575, WI Map of Noise Levels in 53575
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,945 53575 residents, or 24.1%, live above that level. By land area, 27.7% of 53575 is above 55 dBA.

See how noise in 53575 compares to similar-sized zip codes.

Noise by Part of 53575

Average noise levels for 53575 residents, grouped by direction from the center of 53575. Central 53575 carries the highest population-weighted average; Northern 53575 carries the lowest. Just 16% of residents in Northern 53575 live in blocks above the EPA's 55 dBA threshold, about half the share in Central 53575.

Central 53575

54.8 dBA · Moderate-loud
Quiet office to normal conversation

37% of people above 55 dBA

QuietLoud

Eastern 53575

52.0 dBA · Moderate
Quiet office to normal conversation

26% of people above 55 dBA

QuietLoud

Northern 53575

48.9 dBA · Mostly quiet
Quiet office

16% of people above 55 dBA

QuietLoud

Southern 53575

51.6 dBA · Moderate
Quiet office to normal conversation

23% of people above 55 dBA

QuietLoud

Western 53575

50.2 dBA · Moderate
Quiet office

24% of people above 55 dBA

QuietLoud

Central 53575 sounds about 51% louder than Northern 53575 to the human ear, a 5.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 53575 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Ush 014E Freeway 68.6 73
Ush 014W Freeway 65.0 69
Cth M Minor arterial 53.8 69
Cth Mm (1) Major collector 57.2 69
Sth 138N Minor arterial 56.1 67

How far back from Ush 014E do you need to be?

Ush 014E produces an estimated 73 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
73 dBA
City bus interior
165 ft
60 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
37 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 17% of 53575 sits under tree canopy (about average for zip codes) and roughly 19% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 53575

The bar chart below shows the share of 53575 residents in each noise band. About 72% of residents live below the EPA's 55 dBA threshold, and roughly 4% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 53575 Compares

53575 sits the lowest among the peer group. Below: how 53575's average outdoor noise and share of residents above the EPA threshold compare with 53589, 53716, 53713, and 53714.

Average noise level (dBA)

53575's 51.2 dBA pop-weighted average is the lowest among the peer group. Wisconsin as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than 53575 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 24.1% of 53575 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 27.7% of 53575's footprint sits above 55 dBA, against a Wisconsin average of 29.6% and a national average of 28.1%.

What This Means if You're Moving to 53575

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Ush 014E and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 17% of 53575 is under tree cover (about average for zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.