Noise Levels in 62046, IL | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across 62046
Quiet office to normal conversation
288
Residents above the EPA 55 dBA threshold
37% of 62046 residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 62046 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
62046, IL Map of Noise Levels in 62046
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 288 62046 residents, or 36.8%, live above that level. By land area, 27.9% of 62046 is above 55 dBA.

See how noise in 62046 compares to similar-sized zip codes.

Noise by Part of 62046

Average noise levels for 62046 residents, grouped by direction from the center of 62046. Southern 62046 carries the highest population-weighted average; Western 62046 carries the lowest. Just 0% of residents in Western 62046 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern 62046.

Central 62046

53.3 dBA · Moderate-loud
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Eastern 62046

67.3 dBA · Loud
Highway traffic 50 ft away

51% of people above 55 dBA

QuietLoud

Northern 62046

51.2 dBA · Moderate
Quiet office to normal conversation

37% of people above 55 dBA

QuietLoud

Southern 62046

68.1 dBA · Loud
Highway traffic 50 ft away

59% of people above 55 dBA

QuietLoud

Western 62046

44.7 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Southern 62046 sounds about 406% louder than Western 62046 to the human ear, a 23.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Ch-00 do you need to be?

Ch-00 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
61 dBA
Busy restaurant
330 ft
53 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 9% of 62046 sits under tree canopy (lighter than most zip codes) and roughly 29% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across 62046

The bar chart below shows the share of 62046 residents in each noise band. About 56% of residents live below the EPA's 55 dBA threshold, and roughly 16% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 62046 Compares

62046 sits at the quieter end of the spectrum. Below: how 62046's average outdoor noise and share of residents above the EPA threshold compare with 62021, 62058, 62074, and 62048.

Average noise level (dBA)

62046's 54.6 dBA pop-weighted average is at the quieter end of the spectrum. Illinois as a whole averages 52.6 dBA and the U.S. averages 52.0 dBA. Both are lower than 62046 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 36.8% of 62046 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 27.9% of 62046's footprint sits above 55 dBA, against a Illinois average of 29.2% and a national average of 28.1%.

What This Means if You're Moving to 62046

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Ch-00 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 9% of 62046 is under tree cover (lighter than most zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.

Nearby ZIPs

ZIPs with Similar Populations