Noise Levels in 68526, NE | Find Quiet Neighborhoods With Our Sound Map

44 dBA
Average noise across 68526
Quiet suburban street at night
247
Residents above the EPA 55 dBA threshold
5% of 68526 residents
72 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 68526 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
68526, NE Map of Noise Levels in 68526
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 247 68526 residents, or 5.4%, live above that level. By land area, 20.2% of 68526 is above 55 dBA.

See how noise in 68526 compares to similar-sized zip codes.

Noise by Part of 68526

Average noise levels for 68526 residents, grouped by direction from the center of 68526. Western 68526 carries the highest population-weighted average; Northern 68526 carries the lowest. Just 6% of residents in Northern 68526 live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Western 68526.

Central 68526

41.5 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Eastern 68526

45.9 dBA · Mostly quiet
Quiet suburban street at night

5% of people above 55 dBA

QuietLoud

Northern 68526

40.6 dBA · Quiet
Soft rainfall

6% of people above 55 dBA

QuietLoud

Southern 68526

44.6 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Western 68526

52.7 dBA · Moderate
Quiet office to normal conversation

11% of people above 55 dBA

QuietLoud

Western 68526 sounds about 131% louder than Northern 68526 to the human ear, a 12.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 68526 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
84TH St Principal arterial 61.5 65
Nebraska Pkwy Principal arterial 63.6 64
Old Cheney Rd Minor arterial 55.7 58
Pine Lake Rd Local 55.0 56
Yankee Hill Rd Local 54.1 55

How far back from 84TH St do you need to be?

84TH St produces an estimated 65 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
65 dBA
Busy restaurant
165 ft
51 dBA
Quiet office
330 ft
42 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 7% of 68526 sits under tree canopy (lighter than most zip codes) and roughly 46% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 68526

The bar chart below shows the share of 68526 residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 68526 Compares

68526 sits the lowest among the peer group. Below: how 68526's average outdoor noise and share of residents above the EPA threshold compare with 68462, 68528, 68372, and 68524.

Average noise level (dBA)

68526's 44.0 dBA pop-weighted average is the lowest among the peer group. Nebraska as a whole averages 50.7 dBA and the U.S. averages 52.0 dBA. Both are lower than 68526 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 5.4% of 68526 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 20.2% of 68526's footprint sits above 55 dBA, against a Nebraska average of 22.4% and a national average of 28.1%.

What This Means if You're Moving to 68526

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from 84TH St and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 7% of 68526 is under tree cover (lighter than most zip codes), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.