Noise Levels in 76060, TX | Find Quiet Neighborhoods With Our Sound Map
49 dBA
Average noise across 76060
Quiet office
790
Residents above the EPA 55 dBA threshold
12% of 76060 residents
85 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across 76060 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 790 76060 residents, or 12.5%, live above that level. By land area, 15.8% of 76060 is above 55 dBA.
Average noise levels for 76060 residents, grouped by direction from the center of 76060. Central 76060 carries the highest population-weighted average; Eastern 76060 carries the lowest. Just 10% of residents in Eastern 76060 live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Central 76060.
Central 76060
54.8 dBA · Moderate-loud
Quiet office to normal conversation
11% of people above 55 dBA
QuietLoud
Eastern 76060
46.2 dBA · Mostly quiet
Quiet office
10% of people above 55 dBA
QuietLoud
Northern 76060
50.1 dBA · Moderate
Quiet office
18% of people above 55 dBA
QuietLoud
Southern 76060
47.9 dBA · Mostly quiet
Quiet office
8% of people above 55 dBA
QuietLoud
Western 76060
50.0 dBA · Moderate
Quiet office
12% of people above 55 dBA
QuietLoud
Central 76060 sounds about 82% louder than Eastern 76060 to the human ear, a 8.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 85 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet office.
At source
85 dBA
Food blender at arm’s length
165 ft
72 dBA
City bus interior
330 ft
64 dBA
Busy restaurant
660 ft
56 dBA
Quiet office to normal conversation
¼ mile
48 dBA
Quiet office
½ mile
40 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 11% of 76060 sits under tree canopy (lighter than most zip codes) and roughly 31% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of 76060. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Dallas-Fort Worth International (DFW) sits northeast of 76060. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of 76060, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across 76060
The bar chart below shows the share of 76060 residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How 76060 Compares
76060 sits the lowest among the peer group. Below: how 76060's average outdoor noise and share of residents above the EPA threshold compare with 76103, 76102, 76104, and 76164.
Average noise level (dBA)
76060's 49.0 dBA pop-weighted average is the lowest among the peer group. Texas as a whole averages 50.8 dBA and the U.S. averages 52.0 dBA. Both are lower than 76060 because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 12.5% of 76060 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 15.8% of 76060's footprint sits above 55 dBA, against a Texas average of 22.8% and a national average of 28.1%.
What This Means if You're Moving to 76060
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 11% of 76060 is under tree cover (lighter than most zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Dallas-Fort Worth International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
