Noise Levels in 83233, ID | Find Quiet Neighborhoods With Our Sound Map

44 dBA
Average noise across 83233
Quiet suburban street at night
0
Residents above the EPA 55 dBA threshold
0% of 83233 residents
58 dBA
Loudest residential point
Normal conversation an arm’s length away

This map shows modeled outdoor noise across 83233 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
83233, ID Map of Noise Levels in 83233
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 0 83233 residents, or 0.0%, live above that level. By land area, 0.3% of 83233 is above 55 dBA.

See how noise in 83233 compares to similar-sized zip codes.

Noise by Part of 83233

Average noise levels for 83233 residents, grouped by direction from the center of 83233. Northern 83233 carries the highest population-weighted average; Western 83233 carries the lowest. Just 0% of residents in Western 83233 live in blocks above the EPA's 55 dBA threshold, a fraction of the share in Northern 83233.

Central 83233

43.6 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Eastern 83233

43.6 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Northern 83233

46.6 dBA · Mostly quiet
Quiet office

0% of people above 55 dBA

QuietLoud

Southern 83233

43.0 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Western 83233

36.8 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern 83233 sounds about 97% louder than Western 83233 to the human ear, a 9.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Bench do you need to be?

Bench produces an estimated 50 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
50 dBA
Quiet office
165 ft
38 dBA
Soft rainfall
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 0% of 83233 sits under tree canopy (much lighter than most zip codes) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across 83233

The bar chart below shows the share of 83233 residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 83233 Compares

83233 sits at the quieter end of the spectrum. Below: how 83233's average outdoor noise and share of residents above the EPA threshold compare with 83220, 83238, 83223, and 83281.

Average noise level (dBA)

83233's 43.5 dBA pop-weighted average is at the quieter end of the spectrum. Idaho as a whole averages 50.6 dBA and the U.S. averages 52.0 dBA. Both are lower than 83233 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 0.0% of 83233 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 0.3% of 83233's footprint sits above 55 dBA, against a Idaho average of 17.7% and a national average of 28.1%.

What This Means if You're Moving to 83233

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Bench and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 0% of 83233 is under tree cover (much lighter than most zip codes), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.