Noise Levels in Ashley, ND | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across Ashley
Quiet suburban street at night
65
Residents above the EPA 55 dBA threshold
10% of Ashley residents
69 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Ashley at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Ashley, ND Map of Noise Levels in Ashley
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 65 Ashley residents, or 9.9%, live above that level. By land area, 7.3% of Ashley is above 55 dBA.

See how noise in Ashley compares to similar-sized cities.

Noise by Part of Ashley

Average noise levels for Ashley residents, grouped by direction from the center of Ashley. Western Ashley carries the highest population-weighted average; Southern Ashley carries the lowest. Just 0% of residents in Southern Ashley live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Ashley.

Central Ashley

43.5 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Eastern Ashley

39.1 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern Ashley

37.9 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Southern Ashley

31.9 dBA · Quiet
Whisper

0% of people above 55 dBA

QuietLoud

Western Ashley

48.8 dBA · Mostly quiet
Quiet office

14% of people above 55 dBA

QuietLoud

Western Ashley sounds about 223% louder than Southern Ashley to the human ear, a 16.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Ashley using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
100 St Local 56.4 59
95THSTSE Local 55.0 55
94THSTSE Local 55.0 55
98THSTSE Local 55.0 55
97THSTSE Local 55.0 55

How far back from 100 St do you need to be?

100 St produces an estimated 59 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
59 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 0% of Ashley sits under tree canopy (much lighter than most cities) and roughly 30% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Ashley

The bar chart below shows the share of Ashley residents in each noise band. About 90% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Ashley Compares

Ashley sits the lowest among the peer group. Below: how Ashley's average outdoor noise and share of residents above the EPA threshold compare with Wishek, Napoleon, Kulm, and Edgeley.

Average noise level (dBA)

Ashley's 45.7 dBA pop-weighted average is the lowest among the peer group. North Dakota as a whole averages 50.1 dBA and the U.S. averages 52.0 dBA. Both are lower than Ashley because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 9.9% of Ashley residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 7.3% of Ashley's footprint sits above 55 dBA, against a North Dakota average of 11.5% and a national average of 28.1%.

What This Means if You're Moving to Ashley

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from 100 St and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 0% of Ashley is under tree cover (much lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.