Noise Levels in Big Prairie, OH | Find Quiet Neighborhoods With Our Sound Map

44 dBA
Average noise across Big Prairie
Quiet suburban street at night
153
Residents above the EPA 55 dBA threshold
6% of Big Prairie residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Big Prairie at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Big Prairie, OH Map of Noise Levels in Big Prairie
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 153 Big Prairie residents, or 6.1%, live above that level. By land area, 11.1% of Big Prairie is above 55 dBA.

See how noise in Big Prairie compares to similar-sized cities.

Noise by Part of Big Prairie

Average noise levels for Big Prairie residents, grouped by direction from the center of Big Prairie. Northern Big Prairie carries the highest population-weighted average; Eastern Big Prairie carries the lowest. Just 1% of residents in Eastern Big Prairie live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Big Prairie.

Central Big Prairie

45.9 dBA · Mostly quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

Eastern Big Prairie

42.6 dBA · Quiet
Quiet suburban street at night

1% of people above 55 dBA

QuietLoud

Northern Big Prairie

47.0 dBA · Mostly quiet
Quiet office

14% of people above 55 dBA

QuietLoud

Southern Big Prairie

43.1 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Western Big Prairie

43.9 dBA · Quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

Northern Big Prairie sounds about 36% louder than Eastern Big Prairie to the human ear, a 4.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Big Prairie using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Tr 511 Local 58.0 58
Tr 502 Local 56.9 58
Tr 501 Local 58.0 58
Tr 259 Local 58.0 58
Tr 221 Local 58.0 58

How far back from Tr 511 do you need to be?

Tr 511 produces an estimated 58 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
58 dBA
Normal conversation an arm’s length away
165 ft
46 dBA
Quiet suburban street at night
330 ft
39 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 40% of Big Prairie sits under tree canopy (about average for cities) and roughly 2% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of Big Prairie. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across Big Prairie

The bar chart below shows the share of Big Prairie residents in each noise band. About 96% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Big Prairie Compares

Big Prairie sits at the quieter end of the spectrum. Below: how Big Prairie's average outdoor noise and share of residents above the EPA threshold compare with Holmesville, Killbuck, Danville, and Perrysville.

Average noise level (dBA)

Big Prairie's 44.5 dBA pop-weighted average is at the quieter end of the spectrum. Ohio as a whole averages 51.1 dBA and the U.S. averages 52.0 dBA. Both are lower than Big Prairie because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.1% of Big Prairie residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 11.1% of Big Prairie's footprint sits above 55 dBA, against a Ohio average of 26.4% and a national average of 28.1%.

What This Means if You're Moving to Big Prairie

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Tr 511 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 40% of Big Prairie is under tree cover (about average for cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.