Noise Levels in Bisbee, AZ | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Bisbee
Quiet office to normal conversation
1,533
Residents above the EPA 55 dBA threshold
34% of Bisbee residents
70 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Bisbee at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Bisbee, AZ Map of Noise Levels in Bisbee
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,533 Bisbee residents, or 34.0%, live above that level. By land area, 35.9% of Bisbee is above 55 dBA.

See how noise in Bisbee compares to similar-sized cities.

Noise by Part of Bisbee

Average noise levels for Bisbee residents, grouped by direction from the center of Bisbee. Northern Bisbee carries the highest population-weighted average; Southern Bisbee carries the lowest. Just 10% of residents in Southern Bisbee live in blocks above the EPA's 55 dBA threshold, a third of the share in Northern Bisbee.

Eastern Bisbee

53.0 dBA · Moderate-loud
Quiet office to normal conversation

44% of people above 55 dBA

QuietLoud

Northern Bisbee

55.2 dBA · Moderate-loud
Quiet office to normal conversation

43% of people above 55 dBA

QuietLoud

Southern Bisbee

48.6 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Western Bisbee

53.3 dBA · Moderate-loud
Quiet office to normal conversation

38% of people above 55 dBA

QuietLoud

Northern Bisbee sounds about 58% louder than Southern Bisbee to the human ear, a 6.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Bisbee using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
~~s~080~~~~~~~~~~~~~~~~~~~~~~~~~ Principal arterial 60.9 63
~~s~092~~~~~~~~~~~~~~~~~~~~~~~~~ Minor arterial 57.9 61
02S~NACO~HIGHWAY~~~~~~~~~~~~~~~~ Minor arterial 57.2 59
02~~TOMBSTONE~CANYON~~~~~~~~~~~~ Major collector 56.8 57
02E~BORDER~~~~~~~~~~~~~~RD~~~~~~ Minor collector 56.9 57

How far back from ~~s~080~~~~~~~~~~~~~~~~~~~~~~~~~ do you need to be?

~~s~080~~~~~~~~~~~~~~~~~~~~~~~~~ produces an estimated 63 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
63 dBA
Busy restaurant
165 ft
49 dBA
Quiet office
330 ft
41 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 4% of Bisbee sits under tree canopy (much lighter than most cities) and roughly 25% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Bisbee

The bar chart below shows the share of Bisbee residents in each noise band. About 62% of residents live below the EPA's 55 dBA threshold, and roughly 11% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Bisbee Compares

Bisbee sits at the louder end of the spectrum. Below: how Bisbee's average outdoor noise and share of residents above the EPA threshold compare with Fort Huachuca, Hereford, Huachuca City, and Tombstone.

Average noise level (dBA)

Bisbee's 52.5 dBA pop-weighted average is at the louder end of the spectrum. Arizona as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Bisbee because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 34.0% of Bisbee residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 35.9% of Bisbee's footprint sits above 55 dBA, against a Arizona average of 28.3% and a national average of 28.1%.

What This Means if You're Moving to Bisbee

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from ~~s~080~~~~~~~~~~~~~~~~~~~~~~~~~ and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 4% of Bisbee is under tree cover (much lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.