Noise Levels in Campbell Park, Anchorage, AK | Find Quiet Neighborhoods With Our Sound Map
49 dBA
Average noise across Campbell Park
Quiet office
917
Residents above the EPA 55 dBA threshold
34% of Campbell Park residents
69 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Campbell Park at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 917 Campbell Park residents, or 33.7%, live above that level. By land area, 40.6% of Campbell Park is above 55 dBA.
Average noise levels for Campbell Park residents, grouped by direction from the center of Campbell Park. Central Campbell Park carries the highest population-weighted average; Eastern Campbell Park carries the lowest. Just 0% of residents in Eastern Campbell Park live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Campbell Park.
Central Campbell Park
58.8 dBA · Loud
Normal conversation an arm’s length away
76% of people above 55 dBA
QuietLoud
Eastern Campbell Park
40.4 dBA · Quiet
Soft rainfall
0% of people above 55 dBA
QuietLoud
Northern Campbell Park
54.5 dBA · Moderate-loud
Quiet office to normal conversation
42% of people above 55 dBA
QuietLoud
Western Campbell Park
54.7 dBA · Moderate-loud
Quiet office to normal conversation
65% of people above 55 dBA
QuietLoud
Central Campbell Park sounds about 258% louder than Eastern Campbell Park to the human ear, a 18.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 69 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
69 dBA
Highway traffic 50 ft away
165 ft
56 dBA
Quiet office to normal conversation
330 ft
48 dBA
Quiet office
660 ft
41 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 0% of Campbell Park sits under tree canopy (about average for neighborhoods) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Ted Stevens Anchorage International (ANC) sits west of Campbell Park. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Campbell Park, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Campbell Park
The bar chart below shows the share of Campbell Park residents in each noise band. About 66% of residents live below the EPA's 55 dBA threshold, and roughly 10% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Campbell Park Compares
Campbell Park sits the lowest among the peer group. Below: how Campbell Park's average outdoor noise and share of residents above the EPA threshold compare with Turnagain, Scenic Foothills, Mid-Hillside, and University Area.
Average noise level (dBA)
Campbell Park's 48.9 dBA pop-weighted average is the lowest among the peer group. Alaska as a whole averages 46.7 dBA and the U.S. averages 52.0 dBA. Both are lower than Campbell Park because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 33.7% of Campbell Park residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 40.6% of Campbell Park's footprint sits above 55 dBA, against a Alaska average of 11.4% and a national average of 28.1%.
What This Means if You're Moving to Campbell Park
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 0% of Campbell Park is under tree cover (about average for neighborhoods), and the dominant land cover is . Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Ted Stevens Anchorage International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
