Noise Levels in Chisago City, MN | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Chisago City
Quiet office
1,440
Residents above the EPA 55 dBA threshold
20% of Chisago City residents
67 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Chisago City at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Chisago City, MN Map of Noise Levels in Chisago City
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,440 Chisago City residents, or 20.5%, live above that level. By land area, 24.1% of Chisago City is above 55 dBA.

See how noise in Chisago City compares to similar-sized cities.

Noise by Part of Chisago City

Average noise levels for Chisago City residents, grouped by direction from the center of Chisago City. Northern Chisago City carries the highest population-weighted average; Southern Chisago City carries the lowest. Just 12% of residents in Southern Chisago City live in blocks above the EPA's 55 dBA threshold, about half the share in Northern Chisago City.

Eastern Chisago City

51.1 dBA · Moderate
Quiet office to normal conversation

24% of people above 55 dBA

QuietLoud

Northern Chisago City

52.1 dBA · Moderate
Quiet office to normal conversation

24% of people above 55 dBA

QuietLoud

Southern Chisago City

48.9 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Western Chisago City

50.2 dBA · Moderate
Quiet office

22% of people above 55 dBA

QuietLoud

Northern Chisago City sounds about 25% louder than Southern Chisago City to the human ear, a 3.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Chisago City using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
295TH St N Minor collector 57.2 58
Lofton Ave Major collector 54.6 58
Karmel Ave N Local 55.0 55
Stinson Ave Minor collector 53.2 55
Jeffrey Ave N Local 55.0 55

How far back from 295TH St N do you need to be?

295TH St N produces an estimated 58 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
58 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
37 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 31% of Chisago City sits under tree canopy (about average for cities) and roughly 14% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Chisago City

The bar chart below shows the share of Chisago City residents in each noise band. About 83% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Chisago City Compares

Chisago City sits at the quieter end of the spectrum. Below: how Chisago City's average outdoor noise and share of residents above the EPA threshold compare with Lindstrom, Stacy, Wyoming, and Scandia.

Average noise level (dBA)

Chisago City's 50.7 dBA pop-weighted average is at the quieter end of the spectrum. Minnesota as a whole averages 53.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Chisago City because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 20.5% of Chisago City residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 24.1% of Chisago City's footprint sits above 55 dBA, against a Minnesota average of 31.0% and a national average of 28.1%.

What This Means if You're Moving to Chisago City

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from 295TH St N and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 31% of Chisago City is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.