Noise Levels in Cottonwood, AZ | Find Quiet Neighborhoods With Our Sound Map

53 dBA
Average noise across Cottonwood
Quiet office to normal conversation
2,681
Residents above the EPA 55 dBA threshold
30% of Cottonwood residents
72 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Cottonwood at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Cottonwood, AZ Map of Noise Levels in Cottonwood
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,681 Cottonwood residents, or 30.1%, live above that level. By land area, 31.0% of Cottonwood is above 55 dBA.

See how noise in Cottonwood compares to similar-sized cities.

Noise by Part of Cottonwood

Average noise levels for Cottonwood residents, grouped by direction from the center of Cottonwood. Southern Cottonwood carries the highest population-weighted average; Central Cottonwood carries the lowest. Just 16% of residents in Central Cottonwood live in blocks above the EPA's 55 dBA threshold, about half the share in Southern Cottonwood.

Central Cottonwood

50.5 dBA · Moderate
Quiet office

16% of people above 55 dBA

QuietLoud

Eastern Cottonwood

51.9 dBA · Moderate
Quiet office to normal conversation

20% of people above 55 dBA

QuietLoud

Northern Cottonwood

52.3 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Southern Cottonwood

54.0 dBA · Moderate-loud
Quiet office to normal conversation

42% of people above 55 dBA

QuietLoud

Western Cottonwood

52.2 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Southern Cottonwood sounds about 27% louder than Central Cottonwood to the human ear, a 3.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Cottonwood using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
~~s~260~~~~~~~~~~~~~~~~~~~~~~~~~ Principal arterial 65.1 66
~~sa089~~~~~~~~~~~~~~~~~~~~~~~~~ Minor arterial 62.9 65
13N~MAIN~~~~~~~~~~~~~~~~ST~~~~~~ Minor arterial 58.3 60
13E~MINGUS~~~~~~~~~~~~~~AVE~~~~~ Minor arterial 58.2 59
~~sa089~~~~~~~~~~~~~~~~~~~~~~~0~ Local 58.0 58

How far back from ~~s~260~~~~~~~~~~~~~~~~~~~~~~~~~ do you need to be?

~~s~260~~~~~~~~~~~~~~~~~~~~~~~~~ produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
66 dBA
Busy restaurant
165 ft
51 dBA
Quiet office to normal conversation
330 ft
42 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 3% of Cottonwood sits under tree canopy (much lighter than most cities) and roughly 39% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Cottonwood

The bar chart below shows the share of Cottonwood residents in each noise band. About 80% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Cottonwood Compares

Cottonwood sits the highest among the peer group. Below: how Cottonwood's average outdoor noise and share of residents above the EPA threshold compare with Verde Village, Sedona, Camp Verde, and Clarkdale.

Average noise level (dBA)

Cottonwood's 52.6 dBA pop-weighted average is the highest among the peer group. Arizona as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Cottonwood because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 30.1% of Cottonwood residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 31.0% of Cottonwood's footprint sits above 55 dBA, against a Arizona average of 28.3% and a national average of 28.1%.

What This Means if You're Moving to Cottonwood

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from ~~s~260~~~~~~~~~~~~~~~~~~~~~~~~~ and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 3% of Cottonwood is under tree cover (much lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.