Noise Levels in Drew, MS | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across Drew
Quiet office
331
Residents above the EPA 55 dBA threshold
14% of Drew residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Drew at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Drew, MS Map of Noise Levels in Drew
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 331 Drew residents, or 14.1%, live above that level. By land area, 9.4% of Drew is above 55 dBA.

See how noise in Drew compares to similar-sized cities.

Noise by Part of Drew

Average noise levels for Drew residents, grouped by direction from the center of Drew. Central Drew carries the highest population-weighted average; Eastern Drew carries the lowest. Just 0% of residents in Eastern Drew live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Drew.

Central Drew

51.4 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Eastern Drew

43.2 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Northern Drew

50.1 dBA · Moderate
Quiet office

34% of people above 55 dBA

QuietLoud

Southern Drew

46.1 dBA · Mostly quiet
Quiet office

4% of people above 55 dBA

QuietLoud

Western Drew

47.9 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Central Drew sounds about 77% louder than Eastern Drew to the human ear, a 8.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Drew using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US Hwy 49W Minor arterial 54.1 56
Radio Station Rd Local 55.0 55
Smith-murphee Rd Local 55.0 55
Fitzhugh Rd Local 55.0 55
Brooks Rd Major collector 43.2 55

How far back from US Hwy 49W do you need to be?

US Hwy 49W produces an estimated 56 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
56 dBA
Quiet office to normal conversation
165 ft
43 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 18% of Drew sits under tree canopy (lighter than most cities) and roughly 25% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Drew

The bar chart below shows the share of Drew residents in each noise band. About 94% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Drew Compares

Drew sits at the quieter end of the spectrum. Below: how Drew's average outdoor noise and share of residents above the EPA threshold compare with Ruleville, Parchman, Mound Bayou, and Shelby.

Average noise level (dBA)

Drew's 48.2 dBA pop-weighted average is at the quieter end of the spectrum. Mississippi as a whole averages 47.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Drew because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 14.1% of Drew residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 9.4% of Drew's footprint sits above 55 dBA, against a Mississippi average of 17.8% and a national average of 28.1%.

What This Means if You're Moving to Drew

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US Hwy 49W and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 18% of Drew is under tree cover (lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.