Noise Levels in East Side, PA | Find Quiet Neighborhoods With Our Sound Map

54 dBA
Average noise across East Side
Quiet office to normal conversation
33
Residents above the EPA 55 dBA threshold
13% of East Side residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across East Side at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
East Side, PA Map of Noise Levels in East Side
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 33 East Side residents, or 13.2%, live above that level. By land area, 46.9% of East Side is above 55 dBA.

See how noise in East Side compares to similar-sized cities.

Noise by Part of East Side

Average noise levels for East Side residents, grouped by direction from the center of East Side. Western East Side carries the highest population-weighted average; Central East Side carries the lowest. Just 0% of residents in Central East Side live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western East Side.

Central East Side

45.4 dBA · Mostly quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Eastern East Side

50.0 dBA · Moderate
Quiet office

10% of people above 55 dBA

QuietLoud

Western East Side

59.6 dBA · Loud
Normal conversation an arm’s length away

20% of people above 55 dBA

QuietLoud

Western East Side sounds about 168% louder than Central East Side to the human ear, a 14.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in East Side using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Keystone Shortway Rd Interstate 72.5 76
Northeast Extension Interstate 74.0 74
I-80 Interstate 66.3 68
SR-0940 SH Major collector 53.7 54

How far back from Keystone Shortway Rd do you need to be?

Keystone Shortway Rd produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
76 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
58 dBA
Normal conversation an arm’s length away
660 ft
51 dBA
Quiet office to normal conversation
¼ mile
45 dBA
Quiet suburban street at night
½ mile
38 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 61% of East Side sits under tree canopy (heavier than most cities) and roughly 5% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across East Side

The bar chart below shows the share of East Side residents in each noise band. About 53% of residents live below the EPA's 55 dBA threshold, and roughly 44% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How East Side Compares

East Side sits the highest among the peer group. Below: how East Side's average outdoor noise and share of residents above the EPA threshold compare with Penn Lake Park, Buck Mountain, Lake Harmony, and Tannery.

Average noise level (dBA)

East Side's 54.4 dBA pop-weighted average is the highest among the peer group. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than East Side because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 13.2% of East Side residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 46.9% of East Side's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to East Side

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Keystone Shortway Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 61% of East Side is under tree cover (heavier than most cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.