Noise Levels in East Victor, NY | Find Quiet Neighborhoods With Our Sound Map

54 dBA
Average noise across East Victor
Quiet office to normal conversation
138
Residents above the EPA 55 dBA threshold
12% of East Victor residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across East Victor at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
East Victor, NY Map of Noise Levels in East Victor
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 138 East Victor residents, or 12.2%, live above that level. By land area, 15.1% of East Victor is above 55 dBA.

See how noise in East Victor compares to similar-sized cities.

Noise by Part of East Victor

Average noise levels for East Victor residents, grouped by direction from the center of East Victor. Western East Victor carries the highest population-weighted average; Northern East Victor carries the lowest. Just 1% of residents in Northern East Victor live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western East Victor.

Eastern East Victor

53.3 dBA · Moderate-loud
Quiet office to normal conversation

10% of people above 55 dBA

QuietLoud

Northern East Victor

38.1 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Southern East Victor

43.8 dBA · Quiet
Quiet suburban street at night

6% of people above 55 dBA

QuietLoud

Western East Victor

56.9 dBA · Moderate-loud
Normal conversation an arm’s length away

15% of people above 55 dBA

QuietLoud

Western East Victor sounds about 268% louder than Northern East Victor to the human ear, a 18.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from New York State Thruway do you need to be?

New York State Thruway produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
55 dBA
Quiet office to normal conversation
165 ft
41 dBA
Quiet suburban street at night
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 62% of East Victor sits under tree canopy (much heavier than most cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across East Victor

The bar chart below shows the share of East Victor residents in each noise band. About 55% of residents live below the EPA's 55 dBA threshold, and roughly 30% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How East Victor Compares

East Victor sits the highest among the peer group. Below: how East Victor's average outdoor noise and share of residents above the EPA threshold compare with Egypt, Padelford, Mendon, and Port Gibson.

Average noise level (dBA)

East Victor's 53.7 dBA pop-weighted average is the highest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than East Victor because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 12.2% of East Victor residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 15.1% of East Victor's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to East Victor

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from New York State Thruway and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 62% of East Victor is under tree cover (much heavier than most cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.