Noise Levels in Fort Hunter, NY | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Fort Hunter
Quiet office to normal conversation
28
Residents above the EPA 55 dBA threshold
15% of Fort Hunter residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Fort Hunter at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Fort Hunter, NY Map of Noise Levels in Fort Hunter
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 28 Fort Hunter residents, or 14.7%, live above that level. By land area, 41.3% of Fort Hunter is above 55 dBA.

See how noise in Fort Hunter compares to similar-sized cities.

Noise by Part of Fort Hunter

Average noise levels for Fort Hunter residents, grouped by direction from the center of Fort Hunter. Central Fort Hunter carries the highest population-weighted average; Western Fort Hunter carries the lowest. Just 2% of residents in Western Fort Hunter live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Fort Hunter.

Central Fort Hunter

66.8 dBA · Loud
Highway traffic 50 ft away

38% of people above 55 dBA

QuietLoud

Eastern Fort Hunter

59.0 dBA · Loud
Normal conversation an arm’s length away

28% of people above 55 dBA

QuietLoud

Northern Fort Hunter

49.7 dBA · Mostly quiet
Quiet office

11% of people above 55 dBA

QuietLoud

Southern Fort Hunter

42.8 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Western Fort Hunter

42.7 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Central Fort Hunter sounds about 431% louder than Western Fort Hunter to the human ear, a 24.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Nys Thruway do you need to be?

Nys Thruway produces an estimated 74 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
74 dBA
City bus interior
165 ft
60 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
44 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 50% of Fort Hunter sits under tree canopy (heavier than most cities) and roughly 4% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Fort Hunter

The bar chart below shows the share of Fort Hunter residents in each noise band. About 78% of residents live below the EPA's 55 dBA threshold, and roughly 22% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Fort Hunter Compares

Fort Hunter sits the highest among the peer group. Below: how Fort Hunter's average outdoor noise and share of residents above the EPA threshold compare with Auriesville, Randall, Scotch Bush, and Manny Corners.

Average noise level (dBA)

Fort Hunter's 51.2 dBA pop-weighted average is the highest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than Fort Hunter because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 14.7% of Fort Hunter residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 41.3% of Fort Hunter's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to Fort Hunter

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Nys Thruway and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 50% of Fort Hunter is under tree cover (heavier than most cities), and the dominant land cover is woody wetlands. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.

Nearby Cities

Cities with Similar Populations