Noise Levels in Franklin Square, NY | Find Quiet Neighborhoods With Our Sound Map
55 dBA
Average noise across Franklin Square
Quiet office to normal conversation
8,071
Residents above the EPA 55 dBA threshold
41% of Franklin Square residents
81 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across Franklin Square at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 8,071 Franklin Square residents, or 40.9%, live above that level. By land area, 42.3% of Franklin Square is above 55 dBA.
Average noise levels for Franklin Square residents, grouped by direction from the center of Franklin Square. Northern Franklin Square carries the highest population-weighted average; Western Franklin Square carries the lowest. Just 30% of residents in Western Franklin Square live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Northern Franklin Square.
Central Franklin Square
53.7 dBA · Moderate-loud
Quiet office to normal conversation
22% of people above 55 dBA
QuietLoud
Eastern Franklin Square
54.8 dBA · Moderate-loud
Quiet office to normal conversation
41% of people above 55 dBA
QuietLoud
Northern Franklin Square
56.0 dBA · Moderate-loud
Quiet office to normal conversation
54% of people above 55 dBA
QuietLoud
Southern Franklin Square
55.8 dBA · Moderate-loud
Quiet office to normal conversation
39% of people above 55 dBA
QuietLoud
Western Franklin Square
53.5 dBA · Moderate-loud
Quiet office to normal conversation
30% of people above 55 dBA
QuietLoud
Northern Franklin Square sounds about 19% louder than Western Franklin Square to the human ear, a 2.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Franklin Ave do you need to be?
Franklin Ave produces an estimated 62 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
62 dBA
Busy restaurant
165 ft
48 dBA
Quiet office
330 ft
41 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 14% of Franklin Square sits under tree canopy (lighter than most cities) and roughly 58% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
John F Kennedy International (JFK) sits southwest of Franklin Square. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Franklin Square, particularly to the northeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Franklin Square
The bar chart below shows the share of Franklin Square residents in each noise band. About 53% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Franklin Square Compares
Franklin Square sits the lowest among the peer group. Below: how Franklin Square's average outdoor noise and share of residents above the EPA threshold compare with West Hempstead, Lynbrook, Garden City, and Mineola.
Average noise level (dBA)
Franklin Square's 55.3 dBA pop-weighted average is the lowest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than Franklin Square because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 40.9% of Franklin Square residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 42.3% of Franklin Square's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.
What This Means if You're Moving to Franklin Square
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Franklin Ave and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 14% of Franklin Square is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. John F Kennedy International's approach paths concentrate aviation noise to the southwest. Neighborhoods to the northeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
