Noise Levels in Gallion, AL | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across Gallion
Quiet suburban street at night
173
Residents above the EPA 55 dBA threshold
10% of Gallion residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Gallion at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Gallion, AL Map of Noise Levels in Gallion
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 173 Gallion residents, or 10.0%, live above that level. By land area, 17.2% of Gallion is above 55 dBA.

See how noise in Gallion compares to similar-sized cities.

Noise by Part of Gallion

Average noise levels for Gallion residents, grouped by direction from the center of Gallion. Western Gallion carries the highest population-weighted average; Northern Gallion carries the lowest. Just 2% of residents in Northern Gallion live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Gallion.

Eastern Gallion

43.4 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Northern Gallion

40.0 dBA · Quiet
Soft rainfall

2% of people above 55 dBA

QuietLoud

Southern Gallion

47.1 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Western Gallion

52.7 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Western Gallion sounds about 141% louder than Northern Gallion to the human ear, a 12.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Gallion using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US Hwy 80 Principal arterial 64.0 66
Telegraph Rd Principal arterial 60.2 61
Hulaco Rd Minor arterial 55.3 56
State Route 69 Minor arterial 55.0 55
Eaton Quarters Rd Local 55.0 55

How far back from US Hwy 80 do you need to be?

US Hwy 80 produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
66 dBA
Busy restaurant
165 ft
54 dBA
Quiet office to normal conversation
330 ft
47 dBA
Quiet office
660 ft
40 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 25% of Gallion sits under tree canopy (about average for cities) and roughly 8% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of Gallion. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across Gallion

The bar chart below shows the share of Gallion residents in each noise band. About 79% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Gallion Compares

Gallion sits at the quieter end of the spectrum. Below: how Gallion's average outdoor noise and share of residents above the EPA threshold compare with Sawyerville, Linden, Uniontown, and Newbern.

Average noise level (dBA)

Gallion's 45.8 dBA pop-weighted average is at the quieter end of the spectrum. Alabama as a whole averages 49.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Gallion because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 10.0% of Gallion residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 17.2% of Gallion's footprint sits above 55 dBA, against a Alabama average of 20.0% and a national average of 28.1%.

What This Means if You're Moving to Gallion

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US Hwy 80 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 25% of Gallion is under tree cover (about average for cities), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.