Noise Levels in Hyde, PA | Find Quiet Neighborhoods With Our Sound Map
48 dBA
Average noise across Hyde
Quiet office
112
Residents above the EPA 55 dBA threshold
9% of Hyde residents
68 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Hyde at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
What the numbers sound like
- 30 dBAWhisper
- 40 dBASoft rainfall
- 45 dBAQuiet suburban street at night
- 50 dBAQuiet office
- 55 dBAEPA outdoor threshold: light traffic 100 ft away
- 60 dBANormal conversation an arm's length away
- 65 dBABusy restaurant
- 70 dBAHighway traffic 50 ft away
- 80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 112 Hyde residents, or 8.7%, live above that level. By land area, 20.9% of Hyde is above 55 dBA.
79.1% below 55 dBA
20.9% above 55 dBA
See how noise in Hyde compares to similar-sized cities.
Noise by Part of Hyde
Average noise levels for Hyde residents, grouped by direction from the center of Hyde. Southern Hyde carries the highest population-weighted average; Northern Hyde carries the lowest. Just 2% of residents in Northern Hyde live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Hyde.
Eastern Hyde
50.7 dBA · Moderate
Quiet office
Northern Hyde
44.5 dBA · Quiet
Quiet suburban street at night
Southern Hyde
54.3 dBA · Moderate-loud
Quiet office to normal conversation
Western Hyde
48.2 dBA · Mostly quiet
Quiet office
Southern Hyde sounds about 97% louder than Northern Hyde to the human ear, a 9.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Brn5 104TH Calvary Rd do you need to be?
Brn5 104TH Calvary Rd produces an estimated 57 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
57 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
38 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 15% of Hyde sits under tree canopy (lighter than most cities) and roughly 10% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Hyde. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Hyde
The bar chart below shows the share of Hyde residents in each noise band. About 94% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Hyde Compares
Hyde sits the highest among the peer group. Below: how Hyde's average outdoor noise and share of residents above the EPA threshold compare with West Decatur, Woodland, Coalport, and Grampian.
Average noise level (dBA)
Hyde's 48.2 dBA pop-weighted average is the highest among the peer group. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Hyde because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 8.7% of Hyde residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 20.9% of Hyde's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.
What This Means if You're Moving to Hyde
- Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Brn5 104TH Calvary Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
- Tree canopy can help reduce modeled noise exposure. Roughly 15% of Hyde is under tree cover (lighter than most cities), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
