Noise Levels in Lavon Beach Estates, TX | Find Quiet Neighborhoods With Our Sound Map
56 dBA
Average noise across Lavon Beach Estates
Quiet office to normal conversation
14
Residents above the EPA 55 dBA threshold
8% of Lavon Beach Estates residents
94 dBA
Loudest residential point
Power saw
This map shows modeled outdoor noise across Lavon Beach Estates at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 14 Lavon Beach Estates residents, or 8.2%, live above that level. By land area, 14.6% of Lavon Beach Estates is above 55 dBA.
Average noise levels for Lavon Beach Estates residents, grouped by direction from the center of Lavon Beach Estates. Northern Lavon Beach Estates carries the highest population-weighted average; Eastern Lavon Beach Estates carries the lowest. Just 0% of residents in Eastern Lavon Beach Estates live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Lavon Beach Estates.
Eastern Lavon Beach Estates
34.5 dBA · Quiet
Soft rainfall
0% of people above 55 dBA
QuietLoud
Northern Lavon Beach Estates
63.2 dBA · Loud
Busy restaurant
4% of people above 55 dBA
QuietLoud
Southern Lavon Beach Estates
56.7 dBA · Moderate-loud
Normal conversation an arm’s length away
24% of people above 55 dBA
QuietLoud
Northern Lavon Beach Estates sounds about 631% louder than Eastern Lavon Beach Estates to the human ear, a 28.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 94 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet office to normal conversation.
At source
94 dBA
Power saw
165 ft
79 dBA
City bus interior
330 ft
71 dBA
Highway traffic 50 ft away
660 ft
62 dBA
Busy restaurant
¼ mile
54 dBA
Quiet office to normal conversation
½ mile
46 dBA
Quiet suburban street at night
Calculated from the model's calibrated attenuation formula. About 9% of Lavon Beach Estates sits under tree canopy (lighter than most cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Lavon Beach Estates. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Lavon Beach Estates
The bar chart below shows the share of Lavon Beach Estates residents in each noise band. About 40% of residents live below the EPA's 55 dBA threshold, and roughly 34% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Lavon Beach Estates Compares
Lavon Beach Estates sits the highest among the peer group. Below: how Lavon Beach Estates's average outdoor noise and share of residents above the EPA threshold compare with Peniel, Jacobia, Copeville, and Pilot Grove.
Average noise level (dBA)
Lavon Beach Estates's 55.8 dBA pop-weighted average is the highest among the peer group. Texas as a whole averages 50.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Lavon Beach Estates because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 8.2% of Lavon Beach Estates residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 14.6% of Lavon Beach Estates's footprint sits above 55 dBA, against a Texas average of 22.8% and a national average of 28.1%.
What This Means if You're Moving to Lavon Beach Estates
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 9% of Lavon Beach Estates is under tree cover (lighter than most cities), and the dominant land cover is grassland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
