Noise Levels in Nags Head, NC | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Nags Head
Quiet office to normal conversation
501
Residents above the EPA 55 dBA threshold
17% of Nags Head residents
69 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Nags Head at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Nags Head, NC Map of Noise Levels in Nags Head
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 501 Nags Head residents, or 17.1%, live above that level. By land area, 33.0% of Nags Head is above 55 dBA.

See how noise in Nags Head compares to similar-sized cities.

Noise by Part of Nags Head

Average noise levels for Nags Head residents, grouped by direction from the center of Nags Head. Eastern Nags Head carries the highest population-weighted average; Western Nags Head carries the lowest. Just 0% of residents in Western Nags Head live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Nags Head.

Eastern Nags Head

56.9 dBA · Moderate-loud
Normal conversation an arm’s length away

47% of people above 55 dBA

QuietLoud

Northern Nags Head

51.9 dBA · Moderate
Quiet office to normal conversation

16% of people above 55 dBA

QuietLoud

Southern Nags Head

50.0 dBA · Moderate
Quiet office

18% of people above 55 dBA

QuietLoud

Western Nags Head

24.1 dBA · Quiet
Whisper

0% of people above 55 dBA

QuietLoud

Eastern Nags Head sounds about 871% louder than Western Nags Head to the human ear, a 32.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Nags Head using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US-158 Principal arterial 66.1 67
US-64 Principal arterial 65.9 66
Nc-12 Major collector 58.5 61
SR-1243 Local 55.0 55
Ns-98313 Local 55.0 55

How far back from US-158 do you need to be?

US-158 produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
67 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
46 dBA
Quiet office
660 ft
39 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 23% of Nags Head sits under tree canopy (about average for cities) and roughly 23% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Nags Head

The bar chart below shows the share of Nags Head residents in each noise band. About 90% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Nags Head Compares

Nags Head sits at the quieter end of the spectrum. Below: how Nags Head's average outdoor noise and share of residents above the EPA threshold compare with Southern Shores, Kitty Hawk, Manteo, and Wanchese.

Average noise level (dBA)

Nags Head's 51.3 dBA pop-weighted average is at the quieter end of the spectrum. North Carolina as a whole averages 49.7 dBA and the U.S. averages 52.0 dBA. Both are lower than Nags Head because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 17.1% of Nags Head residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 33.0% of Nags Head's footprint sits above 55 dBA, against a North Carolina average of 22.6% and a national average of 28.1%.

What This Means if You're Moving to Nags Head

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US-158 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 23% of Nags Head is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.