Noise Levels in New Almelo, KS | Find Quiet Neighborhoods With Our Sound Map

38 dBA
Average noise across New Almelo
Soft rainfall
0
Residents above the EPA 55 dBA threshold
0% of New Almelo residents
61 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across New Almelo at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
New Almelo, KS Map of Noise Levels in New Almelo
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 0 New Almelo residents, or 0.1%, live above that level. By land area, 0.2% of New Almelo is above 55 dBA.

See how noise in New Almelo compares to similar-sized cities.

Noise by Part of New Almelo

Average noise levels for New Almelo residents, grouped by direction from the center of New Almelo. Western New Almelo carries the highest population-weighted average; Eastern New Almelo carries the lowest. Just 0% of residents in Eastern New Almelo live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Western New Almelo.

Eastern New Almelo

35.5 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern New Almelo

36.6 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Southern New Almelo

38.7 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western New Almelo

38.9 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western New Almelo sounds about 27% louder than Eastern New Almelo to the human ear, a 3.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in New Almelo using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Cc Rd Local 55.0 55
Aa Rd Local 55.0 55
150TH Ave Local 55.0 55
140TH Ave Local 55.0 55
130TH Ave Major collector 43.9 55

How far back from Cc Rd do you need to be?

Cc Rd produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
55 dBA
Quiet office to normal conversation
165 ft
41 dBA
Quiet suburban street at night
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 1% of New Almelo sits under tree canopy (much lighter than most cities) and roughly 1% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across New Almelo

The bar chart below shows the share of New Almelo residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How New Almelo Compares

New Almelo sits the lowest among the peer group. Below: how New Almelo's average outdoor noise and share of residents above the EPA threshold compare with Jennings, Clayton, Dresden, and Tasco.

Average noise level (dBA)

New Almelo's 37.6 dBA pop-weighted average is the lowest among the peer group. Kansas as a whole averages 51.2 dBA and the U.S. averages 52.0 dBA. Both are lower than New Almelo because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 0.1% of New Almelo residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 0.2% of New Almelo's footprint sits above 55 dBA, against a Kansas average of 19.4% and a national average of 28.1%.

What This Means if You're Moving to New Almelo

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Cc Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 1% of New Almelo is under tree cover (much lighter than most cities), and the dominant land cover is cultivated cropland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.