Noise Levels in Northwest Village, West Sacramento, CA | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Northwest Village
Quiet office to normal conversation
1,294
Residents above the EPA 55 dBA threshold
26% of Northwest Village residents
66 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Northwest Village at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Northwest Village, West Sacramento, CA Map of Noise Levels in Northwest Village
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,294 Northwest Village residents, or 26.5%, live above that level. By land area, 32.3% of Northwest Village is above 55 dBA.

See how noise in Northwest Village compares to similar-sized neighborhoods.

Noise by Part of Northwest Village

Average noise levels for Northwest Village residents, grouped by direction from the center of Northwest Village. Central Northwest Village carries the highest population-weighted average; Northern Northwest Village carries the lowest. Just 7% of residents in Northern Northwest Village live in blocks above the EPA's 55 dBA threshold, a fraction of the share in Central Northwest Village.

Central Northwest Village

53.7 dBA · Moderate-loud
Quiet office to normal conversation

0% of people above 55 dBA

QuietLoud

Eastern Northwest Village

51.4 dBA · Moderate
Quiet office to normal conversation

23% of people above 55 dBA

QuietLoud

Northern Northwest Village

49.0 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Southern Northwest Village

53.6 dBA · Moderate-loud
Quiet office to normal conversation

50% of people above 55 dBA

QuietLoud

Western Northwest Village

52.6 dBA · Moderate
Quiet office to normal conversation

31% of people above 55 dBA

QuietLoud

Central Northwest Village sounds about 39% louder than Northern Northwest Village to the human ear, a 4.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
66 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
36 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 2% of Northwest Village sits under tree canopy (much lighter than most neighborhoods) and roughly 62% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Airport Noise

Sacramento International (SMF) sits north of Northwest Village. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Northwest Village, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Northwest Village

The bar chart below shows the share of Northwest Village residents in each noise band. About 82% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Northwest Village Compares

Northwest Village sits the lowest among the peer group. Below: how Northwest Village's average outdoor noise and share of residents above the EPA threshold compare with Bryte, Midtown, Willowcreek, and Upper Land Park.

Average noise level (dBA)

Northwest Village's 51.9 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Northwest Village because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 26.5% of Northwest Village residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 32.3% of Northwest Village's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Northwest Village

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 2% of Northwest Village is under tree cover (much lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Sacramento International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.