Noise Levels in Oak View, Huntington Beach, CA | Find Quiet Neighborhoods With Our Sound Map
52 dBA
Average noise across Oak View
Quiet office to normal conversation
993
Residents above the EPA 55 dBA threshold
12% of Oak View residents
68 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Oak View at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 993 Oak View residents, or 12.0%, live above that level. By land area, 25.9% of Oak View is above 55 dBA.
Average noise levels for Oak View residents, grouped by direction from the center of Oak View. Western Oak View carries the highest population-weighted average; Southern Oak View carries the lowest. Just 11% of residents in Southern Oak View live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Western Oak View.
Central Oak View
51.2 dBA · Moderate
Quiet office to normal conversation
7% of people above 55 dBA
QuietLoud
Northern Oak View
54.0 dBA · Moderate-loud
Quiet office to normal conversation
32% of people above 55 dBA
QuietLoud
Southern Oak View
49.3 dBA · Mostly quiet
Quiet office
11% of people above 55 dBA
QuietLoud
Western Oak View
54.8 dBA · Moderate-loud
Quiet office to normal conversation
19% of people above 55 dBA
QuietLoud
Western Oak View sounds about 46% louder than Southern Oak View to the human ear, a 5.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 68 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
68 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
36 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 3% of Oak View sits under tree canopy (much lighter than most neighborhoods) and roughly 58% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
John Wayne/Orange County (SNA) sits east of Oak View. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Oak View, particularly to the west, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Oak View
The bar chart below shows the share of Oak View residents in each noise band. About 84% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Oak View Compares
Oak View sits the lowest among the peer group. Below: how Oak View's average outdoor noise and share of residents above the EPA threshold compare with Washington, Pico-Lowell, Sandpointe, and Mid City-Santa Ana.
Average noise level (dBA)
Oak View's 51.8 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Oak View because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 12.0% of Oak View residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 25.9% of Oak View's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.
What This Means if You're Moving to Oak View
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 3% of Oak View is under tree cover (much lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. John Wayne/Orange County's approach paths concentrate aviation noise to the east. Neighborhoods to the west of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
