Noise Levels in Ocean Shores, WA | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Ocean Shores
Quiet office
1,406
Residents above the EPA 55 dBA threshold
22% of Ocean Shores residents
62 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across Ocean Shores at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Ocean Shores, WA Map of Noise Levels in Ocean Shores
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,406 Ocean Shores residents, or 21.7%, live above that level. By land area, 24.4% of Ocean Shores is above 55 dBA.

See how noise in Ocean Shores compares to similar-sized cities.

Noise by Part of Ocean Shores

Average noise levels for Ocean Shores residents, grouped by direction from the center of Ocean Shores. Western Ocean Shores carries the highest population-weighted average; Central Ocean Shores carries the lowest. Just 11% of residents in Central Ocean Shores live in blocks above the EPA's 55 dBA threshold, about half the share in Western Ocean Shores.

Central Ocean Shores

48.6 dBA · Mostly quiet
Quiet office

11% of people above 55 dBA

QuietLoud

Eastern Ocean Shores

49.2 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Northern Ocean Shores

49.7 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Southern Ocean Shores

51.5 dBA · Moderate
Quiet office to normal conversation

26% of people above 55 dBA

QuietLoud

Western Ocean Shores

53.4 dBA · Moderate-loud
Quiet office to normal conversation

31% of people above 55 dBA

QuietLoud

Western Ocean Shores sounds about 39% louder than Central Ocean Shores to the human ear, a 4.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Ocean Shores using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Mount Olympus Ave Minor collector 57.0 57
E Ocean Shores Blvd SW Local 55.0 55
Dolphin Ave NE Local 55.0 55
Sand Dune Ave SW Local 55.0 55
Canal Dr NE Local 55.0 55

How far back from Mount Olympus Ave do you need to be?

Mount Olympus Ave produces an estimated 57 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
57 dBA
Normal conversation an arm’s length away
165 ft
44 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 27% of Ocean Shores sits under tree canopy (about average for cities) and roughly 23% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Ocean Shores

The bar chart below shows the share of Ocean Shores residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Ocean Shores Compares

Ocean Shores sits at the louder end of the spectrum. Below: how Ocean Shores's average outdoor noise and share of residents above the EPA threshold compare with Hoquiam, Montesano, Westport, and Elma.

Average noise level (dBA)

Ocean Shores's 50.6 dBA pop-weighted average is at the louder end of the spectrum. Washington as a whole averages 51.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Ocean Shores because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 21.7% of Ocean Shores residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 24.4% of Ocean Shores's footprint sits above 55 dBA, against a Washington average of 27.7% and a national average of 28.1%.

What This Means if You're Moving to Ocean Shores

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Mount Olympus Ave and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 27% of Ocean Shores is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.