Noise Levels in Ocean View, DE | Find Quiet Neighborhoods With Our Sound Map

50 dBA
Average noise across Ocean View
Quiet office
1,145
Residents above the EPA 55 dBA threshold
20% of Ocean View residents
69 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Ocean View at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Ocean View, DE Map of Noise Levels in Ocean View
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,145 Ocean View residents, or 20.0%, live above that level. By land area, 24.9% of Ocean View is above 55 dBA.

See how noise in Ocean View compares to similar-sized cities.

Noise by Part of Ocean View

Average noise levels for Ocean View residents, grouped by direction from the center of Ocean View. Central Ocean View carries the highest population-weighted average; Northern Ocean View carries the lowest. Just 18% of residents in Northern Ocean View live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Central Ocean View.

Central Ocean View

52.0 dBA · Moderate
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Eastern Ocean View

49.3 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Northern Ocean View

49.1 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Southern Ocean View

49.6 dBA · Mostly quiet
Quiet office

19% of people above 55 dBA

QuietLoud

Western Ocean View

50.3 dBA · Moderate
Quiet office

25% of people above 55 dBA

QuietLoud

Central Ocean View sounds about 22% louder than Northern Ocean View to the human ear, a 2.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Ocean View using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Sr1n Principal arterial 65.0 65
Old Mill Rd Local 60.6 62
Club House Rd Local 61.3 62
Cedar Neck Rd Major collector 56.6 60
Whites Neck Rd Local 60.0 60

How far back from Sr1n do you need to be?

Sr1n produces an estimated 65 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
65 dBA
Busy restaurant
165 ft
51 dBA
Quiet office to normal conversation
330 ft
44 dBA
Quiet suburban street at night
660 ft
36 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 27% of Ocean View sits under tree canopy (about average for cities) and roughly 29% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Ocean View

The bar chart below shows the share of Ocean View residents in each noise band. About 82% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Ocean View Compares

Ocean View sits the highest among the peer group. Below: how Ocean View's average outdoor noise and share of residents above the EPA threshold compare with Frankford, Dagsboro, Selbyville, and Delmar.

Average noise level (dBA)

Ocean View's 49.7 dBA pop-weighted average is the highest among the peer group. Delaware as a whole averages 53.5 dBA and the U.S. averages 52.0 dBA. Both are lower than Ocean View because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 20.0% of Ocean View residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 24.9% of Ocean View's footprint sits above 55 dBA, against a Delaware average of 38.3% and a national average of 28.1%.

What This Means if You're Moving to Ocean View

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Sr1n and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 27% of Ocean View is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.