Noise Levels in Palm River-Clair Mel, FL | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Palm River-Clair Mel
Quiet office to normal conversation
4,298
Residents above the EPA 55 dBA threshold
24% of Palm River-Clair Mel residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Palm River-Clair Mel at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Palm River-Clair Mel, FL Map of Noise Levels in Palm River-Clair Mel
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 4,298 Palm River-Clair Mel residents, or 23.5%, live above that level. By land area, 27.8% of Palm River-Clair Mel is above 55 dBA.

See how noise in Palm River-Clair Mel compares to similar-sized cities.

Noise by Part of Palm River-Clair Mel

Average noise levels for Palm River-Clair Mel residents, grouped by direction from the center of Palm River-Clair Mel. Eastern Palm River-Clair Mel carries the highest population-weighted average; Southern Palm River-Clair Mel carries the lowest. Just 14% of residents in Southern Palm River-Clair Mel live in blocks above the EPA's 55 dBA threshold, about half the share in Eastern Palm River-Clair Mel.

Central Palm River-Clair Mel

51.5 dBA · Moderate
Quiet office to normal conversation

25% of people above 55 dBA

QuietLoud

Eastern Palm River-Clair Mel

55.1 dBA · Moderate-loud
Quiet office to normal conversation

40% of people above 55 dBA

QuietLoud

Northern Palm River-Clair Mel

53.1 dBA · Moderate-loud
Quiet office to normal conversation

26% of people above 55 dBA

QuietLoud

Southern Palm River-Clair Mel

49.5 dBA · Mostly quiet
Quiet office

14% of people above 55 dBA

QuietLoud

Western Palm River-Clair Mel

52.5 dBA · Moderate
Quiet office to normal conversation

14% of people above 55 dBA

QuietLoud

Eastern Palm River-Clair Mel sounds about 47% louder than Southern Palm River-Clair Mel to the human ear, a 5.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Palm River-Clair Mel using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Selmon Expy Major collector 61.4 77
Selmon Expy Rl Freeway 74.9 76
State Hwy 93A Interstate 71.0 71
S 50 St Principal arterial 67.8 68
Causeway Blvd Principal arterial 65.3 66

How far back from Selmon Expy do you need to be?

Selmon Expy produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 20% of Palm River-Clair Mel sits under tree canopy (lighter than most cities) and roughly 36% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of Palm River-Clair Mel. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Tampa International (TPA) sits west of Palm River-Clair Mel. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Palm River-Clair Mel, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Palm River-Clair Mel

The bar chart below shows the share of Palm River-Clair Mel residents in each noise band. About 71% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Palm River-Clair Mel Compares

Palm River-Clair Mel sits at the quieter end of the spectrum. Below: how Palm River-Clair Mel's average outdoor noise and share of residents above the EPA threshold compare with Seffner, Dover, Gibsonton, and East Lake-Orient Park.

Average noise level (dBA)

Palm River-Clair Mel's 52.4 dBA pop-weighted average is at the quieter end of the spectrum. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Palm River-Clair Mel because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 23.5% of Palm River-Clair Mel residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 27.8% of Palm River-Clair Mel's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to Palm River-Clair Mel

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Selmon Expy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 20% of Palm River-Clair Mel is under tree cover (lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Tampa International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.