Noise Levels in Rancho Mirage, CA | Find Quiet Neighborhoods With Our Sound Map
46 dBA
Average noise across Rancho Mirage
Quiet suburban street at night
1,858
Residents above the EPA 55 dBA threshold
16% of Rancho Mirage residents
70 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Rancho Mirage at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,858 Rancho Mirage residents, or 15.8%, live above that level. By land area, 19.8% of Rancho Mirage is above 55 dBA.
Average noise levels for Rancho Mirage residents, grouped by direction from the center of Rancho Mirage. Western Rancho Mirage carries the highest population-weighted average; Central Rancho Mirage carries the lowest. Just 3% of residents in Central Rancho Mirage live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Rancho Mirage.
Central Rancho Mirage
41.1 dBA · Quiet
Quiet suburban street at night
3% of people above 55 dBA
QuietLoud
Eastern Rancho Mirage
42.8 dBA · Quiet
Quiet suburban street at night
3% of people above 55 dBA
QuietLoud
Northern Rancho Mirage
45.3 dBA · Mostly quiet
Quiet suburban street at night
18% of people above 55 dBA
QuietLoud
Southern Rancho Mirage
45.7 dBA · Mostly quiet
Quiet suburban street at night
17% of people above 55 dBA
QuietLoud
Western Rancho Mirage
47.8 dBA · Mostly quiet
Quiet office
19% of people above 55 dBA
QuietLoud
Western Rancho Mirage sounds about 59% louder than Central Rancho Mirage to the human ear, a 6.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 70 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
70 dBA
Highway traffic 50 ft away
165 ft
57 dBA
Normal conversation an arm’s length away
330 ft
50 dBA
Quiet office
660 ft
42 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 2% of Rancho Mirage sits under tree canopy (much lighter than most cities) and roughly 42% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Rancho Mirage. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Palm Springs International (PSP) sits northwest of Rancho Mirage. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Rancho Mirage, particularly to the southeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Rancho Mirage
The bar chart below shows the share of Rancho Mirage residents in each noise band. About 88% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Rancho Mirage Compares
Rancho Mirage sits the lowest among the peer group. Below: how Rancho Mirage's average outdoor noise and share of residents above the EPA threshold compare with Thousand Palms, Garnet, Valle Vista, and Thermal.
Average noise level (dBA)
Rancho Mirage's 45.6 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Rancho Mirage because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 15.8% of Rancho Mirage residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 19.8% of Rancho Mirage's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.
What This Means if You're Moving to Rancho Mirage
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 2% of Rancho Mirage is under tree cover (much lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Palm Springs International's approach paths concentrate aviation noise to the northwest. Neighborhoods to the southeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
