Noise Levels in Regent Square, Pittsburgh, PA | Find Quiet Neighborhoods With Our Sound Map

61 dBA
Average noise across Regent Square
Normal conversation an arm’s length away
2,727
Residents above the EPA 55 dBA threshold
79% of Regent Square residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Regent Square at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Regent Square, Pittsburgh, PA Map of Noise Levels in Regent Square
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,727 Regent Square residents, or 79.3%, live above that level. By land area, 82.1% of Regent Square is above 55 dBA.

See how noise in Regent Square compares to similar-sized neighborhoods.

Noise by Part of Regent Square

Average noise levels for Regent Square residents, grouped by direction from the center of Regent Square. Eastern Regent Square carries the highest population-weighted average; Western Regent Square carries the lowest. Just 62% of residents in Western Regent Square live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Eastern Regent Square.

Central Regent Square

61.9 dBA · Loud
Busy restaurant

86% of people above 55 dBA

QuietLoud

Eastern Regent Square

62.0 dBA · Loud
Busy restaurant

75% of people above 55 dBA

QuietLoud

Northern Regent Square

58.0 dBA · Loud
Normal conversation an arm’s length away

88% of people above 55 dBA

QuietLoud

Southern Regent Square

59.8 dBA · Loud
Normal conversation an arm’s length away

77% of people above 55 dBA

QuietLoud

Western Regent Square

57.7 dBA · Moderate-loud
Normal conversation an arm’s length away

62% of people above 55 dBA

QuietLoud

Eastern Regent Square sounds about 35% louder than Western Regent Square to the human ear, a 4.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Penn Lincoln Py do you need to be?

Penn Lincoln Py produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
40 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 32% of Regent Square sits under tree canopy (much heavier than most neighborhoods) and roughly 41% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Regent Square. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Pittsburgh International (PIT) sits west of Regent Square. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Regent Square, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Regent Square

The bar chart below shows the share of Regent Square residents in each noise band. About 12% of residents live below the EPA's 55 dBA threshold, and roughly 50% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Regent Square Compares

Regent Square sits the highest among the peer group. Below: how Regent Square's average outdoor noise and share of residents above the EPA threshold compare with East Hills, Stanton Heights, Southside Slopes, and Lincoln Place.

Average noise level (dBA)

Regent Square's 60.7 dBA pop-weighted average is the highest among the peer group. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Regent Square because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 79.3% of Regent Square residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 82.1% of Regent Square's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to Regent Square

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Penn Lincoln Py and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 32% of Regent Square is under tree cover (much heavier than most neighborhoods), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Pittsburgh International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.