Noise Levels in Ridgewood Junction, Glen Rock, NJ | Find Quiet Neighborhoods With Our Sound Map

59 dBA
Average noise across Ridgewood Junction
Normal conversation an arm’s length away
1,678
Residents above the EPA 55 dBA threshold
49% of Ridgewood Junction residents
96 dBA
Loudest residential point
Power saw

This map shows modeled outdoor noise across Ridgewood Junction at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Ridgewood Junction, Glen Rock, NJ Map of Noise Levels in Ridgewood Junction
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,678 Ridgewood Junction residents, or 49.4%, live above that level. By land area, 43.9% of Ridgewood Junction is above 55 dBA.

See how noise in Ridgewood Junction compares to similar-sized neighborhoods.

Noise by Part of Ridgewood Junction

Average noise levels for Ridgewood Junction residents, grouped by direction from the center of Ridgewood Junction. Northern Ridgewood Junction carries the highest population-weighted average; Eastern Ridgewood Junction carries the lowest. Just 6% of residents in Eastern Ridgewood Junction live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Ridgewood Junction.

Central Ridgewood Junction

63.3 dBA · Loud
Busy restaurant

68% of people above 55 dBA

QuietLoud

Eastern Ridgewood Junction

49.6 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Northern Ridgewood Junction

65.4 dBA · Loud
Busy restaurant

49% of people above 55 dBA

QuietLoud

Southern Ridgewood Junction

58.0 dBA · Loud
Normal conversation an arm’s length away

81% of people above 55 dBA

QuietLoud

Western Ridgewood Junction

54.2 dBA · Moderate-loud
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Northern Ridgewood Junction sounds about 199% louder than Eastern Ridgewood Junction to the human ear, a 15.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 96 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a normal conversation an arm’s length away.

At source
96 dBA
Power saw
165 ft
83 dBA
Food blender at arm’s length
330 ft
75 dBA
City bus interior
660 ft
67 dBA
Highway traffic 50 ft away
¼ mile
60 dBA
Normal conversation an arm’s length away
½ mile
52 dBA
Quiet office to normal conversation

Calculated from the model's calibrated attenuation formula. About 51% of Ridgewood Junction sits under tree canopy (much heavier than most neighborhoods) and roughly 21% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Ridgewood Junction. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Laguardia (LGA) sits southeast of Ridgewood Junction. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Ridgewood Junction, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Ridgewood Junction

The bar chart below shows the share of Ridgewood Junction residents in each noise band. About 40% of residents live below the EPA's 55 dBA threshold, and roughly 22% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Ridgewood Junction Compares

Ridgewood Junction sits at the louder end of the spectrum. Below: how Ridgewood Junction's average outdoor noise and share of residents above the EPA threshold compare with Wortendyke, Northwest Ridgewood, Passaic Junction, and Albion Place.

Average noise level (dBA)

Ridgewood Junction's 59.2 dBA pop-weighted average is at the louder end of the spectrum. New Jersey as a whole averages 49.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Ridgewood Junction because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 49.4% of Ridgewood Junction residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 43.9% of Ridgewood Junction's footprint sits above 55 dBA, against a New Jersey average of 25.2% and a national average of 28.1%.

What This Means if You're Moving to Ridgewood Junction

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 51% of Ridgewood Junction is under tree cover (much heavier than most neighborhoods), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Laguardia's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.