Noise Levels in Robla, Sacramento, CA | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across Robla
Quiet office to normal conversation
4,234
Residents above the EPA 55 dBA threshold
47% of Robla residents
84 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Robla at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Robla, Sacramento, CA Map of Noise Levels in Robla
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 4,234 Robla residents, or 46.6%, live above that level. By land area, 46.2% of Robla is above 55 dBA.

See how noise in Robla compares to similar-sized neighborhoods.

Noise by Part of Robla

Average noise levels for Robla residents, grouped by direction from the center of Robla. Southern Robla carries the highest population-weighted average; Central Robla carries the lowest. Just 13% of residents in Central Robla live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Robla.

Central Robla

49.3 dBA · Mostly quiet
Quiet office

13% of people above 55 dBA

QuietLoud

Eastern Robla

54.7 dBA · Moderate-loud
Quiet office to normal conversation

44% of people above 55 dBA

QuietLoud

Northern Robla

52.8 dBA · Moderate
Quiet office to normal conversation

35% of people above 55 dBA

QuietLoud

Southern Robla

60.6 dBA · Loud
Normal conversation an arm’s length away

75% of people above 55 dBA

QuietLoud

Western Robla

55.6 dBA · Moderate-loud
Quiet office to normal conversation

48% of people above 55 dBA

QuietLoud

Southern Robla sounds about 119% louder than Central Robla to the human ear, a 11.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-80 do you need to be?

I-80 produces an estimated 79 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
79 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
56 dBA
Normal conversation an arm’s length away
660 ft
48 dBA
Quiet office
¼ mile
40 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 1% of Robla sits under tree canopy (much lighter than most neighborhoods) and roughly 32% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Robla. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Sacramento International (SMF) sits west of Robla. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Robla, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Robla

The bar chart below shows the share of Robla residents in each noise band. About 59% of residents live below the EPA's 55 dBA threshold, and roughly 16% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Robla Compares

Robla sits at the quieter end of the spectrum. Below: how Robla's average outdoor noise and share of residents above the EPA threshold compare with Natomas Park, College Glen, Village 2, and Greenhaven.

Average noise level (dBA)

Robla's 55.2 dBA pop-weighted average is at the quieter end of the spectrum. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Robla because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 46.6% of Robla residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 46.2% of Robla's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Robla

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-80 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 1% of Robla is under tree cover (much lighter than most neighborhoods), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Sacramento International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.