Noise Levels in Rose Village, Vancouver, WA | Find Quiet Neighborhoods With Our Sound Map
57 dBA
Average noise across Rose Village
Normal conversation an arm’s length away
3,327
Residents above the EPA 55 dBA threshold
70% of Rose Village residents
75 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Rose Village at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,327 Rose Village residents, or 70.5%, live above that level. By land area, 67.0% of Rose Village is above 55 dBA.
Average noise levels for Rose Village residents, grouped by direction from the center of Rose Village. Western Rose Village carries the highest population-weighted average; Eastern Rose Village carries the lowest. Just 71% of residents in Eastern Rose Village live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Western Rose Village.
Central Rose Village
56.2 dBA · Moderate-loud
Normal conversation an arm’s length away
65% of people above 55 dBA
QuietLoud
Eastern Rose Village
55.5 dBA · Moderate-loud
Quiet office to normal conversation
71% of people above 55 dBA
QuietLoud
Northern Rose Village
57.6 dBA · Moderate-loud
Normal conversation an arm’s length away
69% of people above 55 dBA
QuietLoud
Southern Rose Village
59.5 dBA · Loud
Normal conversation an arm’s length away
61% of people above 55 dBA
QuietLoud
Western Rose Village
60.8 dBA · Loud
Normal conversation an arm’s length away
88% of people above 55 dBA
QuietLoud
Western Rose Village sounds about 44% louder than Eastern Rose Village to the human ear, a 5.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from I-5 do you need to be?
I-5 produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 21% of Rose Village sits under tree canopy (heavier than most neighborhoods) and roughly 56% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Portland International (PDX) sits southeast of Rose Village. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Rose Village, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Rose Village
The bar chart below shows the share of Rose Village residents in each noise band. About 28% of residents live below the EPA's 55 dBA threshold, and roughly 28% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Rose Village Compares
Rose Village sits the highest among the peer group. Below: how Rose Village's average outdoor noise and share of residents above the EPA threshold compare with Hamey Heights, Ogden, Vancouver Heights, and Ellsworth Springs.
Average noise level (dBA)
Rose Village's 57.4 dBA pop-weighted average is the highest among the peer group. Washington as a whole averages 51.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Rose Village because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 70.5% of Rose Village residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 67.0% of Rose Village's footprint sits above 55 dBA, against a Washington average of 27.7% and a national average of 28.1%.
What This Means if You're Moving to Rose Village
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-5 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 21% of Rose Village is under tree cover (heavier than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Portland International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
