Noise Levels in Skaneateles Falls, NY | Find Quiet Neighborhoods With Our Sound Map
46 dBA
Average noise across Skaneateles Falls
Quiet suburban street at night
19
Residents above the EPA 55 dBA threshold
4% of Skaneateles Falls residents
96 dBA
Loudest residential point
Power saw
This map shows modeled outdoor noise across Skaneateles Falls at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 19 Skaneateles Falls residents, or 4.0%, live above that level. By land area, 3.3% of Skaneateles Falls is above 55 dBA.
Average noise levels for Skaneateles Falls residents, grouped by direction from the center of Skaneateles Falls. Western Skaneateles Falls carries the highest population-weighted average; Eastern Skaneateles Falls carries the lowest. Just 1% of residents in Eastern Skaneateles Falls live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Skaneateles Falls.
Central Skaneateles Falls
52.1 dBA · Moderate
Quiet office to normal conversation
23% of people above 55 dBA
QuietLoud
Eastern Skaneateles Falls
40.4 dBA · Quiet
Soft rainfall
1% of people above 55 dBA
QuietLoud
Northern Skaneateles Falls
44.8 dBA · Quiet
Quiet suburban street at night
2% of people above 55 dBA
QuietLoud
Southern Skaneateles Falls
43.6 dBA · Quiet
Quiet suburban street at night
2% of people above 55 dBA
QuietLoud
Western Skaneateles Falls
61.5 dBA · Loud
Busy restaurant
5% of people above 55 dBA
QuietLoud
Western Skaneateles Falls sounds about 332% louder than Eastern Skaneateles Falls to the human ear, a 21.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 96 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a normal conversation an arm’s length away.
At source
96 dBA
Power saw
165 ft
82 dBA
Food blender at arm’s length
330 ft
74 dBA
City bus interior
660 ft
67 dBA
Highway traffic 50 ft away
¼ mile
59 dBA
Normal conversation an arm’s length away
½ mile
51 dBA
Quiet office to normal conversation
Calculated from the model's calibrated attenuation formula. About 26% of Skaneateles Falls sits under tree canopy (about average for cities) and roughly 4% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Skaneateles Falls. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Skaneateles Falls
The bar chart below shows the share of Skaneateles Falls residents in each noise band. About 95% of residents live below the EPA's 55 dBA threshold, and roughly 5% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Skaneateles Falls Compares
Skaneateles Falls sits at the louder end of the spectrum. Below: how Skaneateles Falls's average outdoor noise and share of residents above the EPA threshold compare with Mottville, Throopsville, Sennett, and Howlett Hill.
Average noise level (dBA)
Skaneateles Falls's 45.6 dBA pop-weighted average is at the louder end of the spectrum. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than Skaneateles Falls because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 4.0% of Skaneateles Falls residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 3.3% of Skaneateles Falls's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.
What This Means if You're Moving to Skaneateles Falls
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 26% of Skaneateles Falls is under tree cover (about average for cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
