Noise Levels in Sunrise Beach Village, TX | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across Sunrise Beach Village
Quiet suburban street at night
27
Residents above the EPA 55 dBA threshold
4% of Sunrise Beach Village residents
58 dBA
Loudest residential point
Normal conversation an arm’s length away

This map shows modeled outdoor noise across Sunrise Beach Village at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Sunrise Beach Village, TX Map of Noise Levels in Sunrise Beach Village
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 27 Sunrise Beach Village residents, or 4.0%, live above that level. By land area, 1.5% of Sunrise Beach Village is above 55 dBA.

See how noise in Sunrise Beach Village compares to similar-sized cities.

Noise by Part of Sunrise Beach Village

Average noise levels for Sunrise Beach Village residents, grouped by direction from the center of Sunrise Beach Village. Northern Sunrise Beach Village carries the highest population-weighted average; Western Sunrise Beach Village carries the lowest. Just 0% of residents in Western Sunrise Beach Village live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Sunrise Beach Village.

Eastern Sunrise Beach Village

46.4 dBA · Mostly quiet
Quiet office

0% of people above 55 dBA

QuietLoud

Northern Sunrise Beach Village

47.6 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Southern Sunrise Beach Village

40.0 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western Sunrise Beach Village

37.7 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern Sunrise Beach Village sounds about 99% louder than Western Sunrise Beach Village to the human ear, a 9.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 58 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
58 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
37 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 11% of Sunrise Beach Village sits under tree canopy (lighter than most cities) and roughly 25% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Sunrise Beach Village

The bar chart below shows the share of Sunrise Beach Village residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Sunrise Beach Village Compares

Sunrise Beach Village sits at the louder end of the spectrum. Below: how Sunrise Beach Village's average outdoor noise and share of residents above the EPA threshold compare with Highland Haven, Cottonwood Shores, Round Mountain, and Smithwick.

Average noise level (dBA)

Sunrise Beach Village's 45.6 dBA pop-weighted average is at the louder end of the spectrum. Texas as a whole averages 50.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Sunrise Beach Village because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 4.0% of Sunrise Beach Village residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 1.5% of Sunrise Beach Village's footprint sits above 55 dBA, against a Texas average of 22.8% and a national average of 28.1%.

What This Means if You're Moving to Sunrise Beach Village

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 11% of Sunrise Beach Village is under tree cover (lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.

Nearby Cities

Cities with Similar Populations