Noise Levels in Surfside, MA | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Surfside
Quiet office to normal conversation
92
Residents above the EPA 55 dBA threshold
18% of Surfside residents
85 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Surfside at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Surfside, MA Map of Noise Levels in Surfside
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 92 Surfside residents, or 17.7%, live above that level. By land area, 36.7% of Surfside is above 55 dBA.

See how noise in Surfside compares to similar-sized cities.

Noise by Part of Surfside

Average noise levels for Surfside residents, grouped by direction from the center of Surfside. Eastern Surfside carries the highest population-weighted average; Central Surfside carries the lowest. Just 11% of residents in Central Surfside live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Surfside.

Central Surfside

50.1 dBA · Moderate
Quiet office

11% of people above 55 dBA

QuietLoud

Eastern Surfside

62.9 dBA · Loud
Busy restaurant

93% of people above 55 dBA

QuietLoud

Western Surfside

50.9 dBA · Moderate
Quiet office

13% of people above 55 dBA

QuietLoud

Eastern Surfside sounds about 143% louder than Central Surfside to the human ear, a 12.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 85 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet office.

At source
85 dBA
Food blender at arm’s length
165 ft
71 dBA
City bus interior
330 ft
63 dBA
Busy restaurant
660 ft
56 dBA
Quiet office to normal conversation
¼ mile
48 dBA
Quiet office
½ mile
40 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 55% of Surfside sits under tree canopy (heavier than most cities) and roughly 13% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Surfside

The bar chart below shows the share of Surfside residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Surfside Compares

Surfside sits at the quieter end of the spectrum. Below: how Surfside's average outdoor noise and share of residents above the EPA threshold compare with Siasconset, West Tisbury, Oak Bluffs, and Hyannis Port.

Average noise level (dBA)

Surfside's 51.2 dBA pop-weighted average is at the quieter end of the spectrum. Massachusetts as a whole averages 54.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Surfside because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 17.7% of Surfside residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 36.7% of Surfside's footprint sits above 55 dBA, against a Massachusetts average of 40.0% and a national average of 28.1%.

What This Means if You're Moving to Surfside

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 55% of Surfside is under tree cover (heavier than most cities), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.

Nearby Cities

Cities with Similar Populations