Noise Levels in Temecula, CA | Find Quiet Neighborhoods With Our Sound Map

51 dBA
Average noise across Temecula
Quiet office
25,851
Residents above the EPA 55 dBA threshold
23% of Temecula residents
87 dBA
Loudest residential point
Lawnmower at 1 m

This map shows modeled outdoor noise across Temecula at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Temecula, CA Map of Noise Levels in Temecula
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 25,851 Temecula residents, or 22.8%, live above that level. By land area, 23.2% of Temecula is above 55 dBA.

See how noise in Temecula compares to similar-sized cities.

Noise by Part of Temecula

Average noise levels for Temecula residents, grouped by direction from the center of Temecula. Central Temecula carries the highest population-weighted average; Eastern Temecula carries the lowest. Just 20% of residents in Eastern Temecula live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Central Temecula.

Central Temecula

52.8 dBA · Moderate
Quiet office to normal conversation

37% of people above 55 dBA

QuietLoud

Eastern Temecula

49.9 dBA · Mostly quiet
Quiet office

20% of people above 55 dBA

QuietLoud

Northern Temecula

51.2 dBA · Moderate
Quiet office to normal conversation

24% of people above 55 dBA

QuietLoud

Southern Temecula

51.0 dBA · Moderate
Quiet office

24% of people above 55 dBA

QuietLoud

Western Temecula

50.8 dBA · Moderate
Quiet office

22% of people above 55 dBA

QuietLoud

Central Temecula sounds about 22% louder than Eastern Temecula to the human ear, a 2.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Temecula using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-15 Interstate 71.3 80
State Rte 79 Interstate 70.1 79
Escondido Fwy Minor arterial 58.0 67

How far back from I-15 do you need to be?

I-15 produces an estimated 80 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
80 dBA
City bus interior
165 ft
67 dBA
Highway traffic 50 ft away
330 ft
60 dBA
Normal conversation an arm’s length away
660 ft
53 dBA
Quiet office to normal conversation
¼ mile
45 dBA
Quiet suburban street at night
½ mile
38 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 8% of Temecula sits under tree canopy (lighter than most cities) and roughly 45% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Temecula

The bar chart below shows the share of Temecula residents in each noise band. About 90% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Temecula Compares

Temecula sits the lowest among the peer group. Below: how Temecula's average outdoor noise and share of residents above the EPA threshold compare with Murrieta, Menifee, Vista, and Hemet.

Average noise level (dBA)

Temecula's 50.8 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Temecula because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 22.8% of Temecula residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 23.2% of Temecula's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Temecula

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-15 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 8% of Temecula is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.