Noise Levels in Tippecanoe, Milwaukee, WI | Find Quiet Neighborhoods With Our Sound Map

58 dBA
Average noise across Tippecanoe
Normal conversation an arm’s length away
3,746
Residents above the EPA 55 dBA threshold
67% of Tippecanoe residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Tippecanoe at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Tippecanoe, Milwaukee, WI Map of Noise Levels in Tippecanoe
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,746 Tippecanoe residents, or 66.9%, live above that level. By land area, 70.7% of Tippecanoe is above 55 dBA.

See how noise in Tippecanoe compares to similar-sized neighborhoods.

Noise by Part of Tippecanoe

Average noise levels for Tippecanoe residents, grouped by direction from the center of Tippecanoe. Central Tippecanoe carries the highest population-weighted average; Northern Tippecanoe carries the lowest. Just 60% of residents in Northern Tippecanoe live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Central Tippecanoe.

Central Tippecanoe

57.7 dBA · Moderate-loud
Normal conversation an arm’s length away

76% of people above 55 dBA

QuietLoud

Eastern Tippecanoe

57.4 dBA · Moderate-loud
Normal conversation an arm’s length away

71% of people above 55 dBA

QuietLoud

Northern Tippecanoe

56.6 dBA · Moderate-loud
Normal conversation an arm’s length away

60% of people above 55 dBA

QuietLoud

Southern Tippecanoe

56.6 dBA · Moderate-loud
Normal conversation an arm’s length away

72% of people above 55 dBA

QuietLoud

Western Tippecanoe

57.7 dBA · Moderate-loud
Normal conversation an arm’s length away

56% of people above 55 dBA

QuietLoud

Central Tippecanoe sounds about 8% louder than Northern Tippecanoe to the human ear, a 1.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from E Howard Ave do you need to be?

E Howard Ave produces an estimated 60 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
60 dBA
Normal conversation an arm’s length away
165 ft
46 dBA
Quiet suburban street at night
330 ft
38 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 13% of Tippecanoe sits under tree canopy (about average for neighborhoods) and roughly 50% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Tippecanoe. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

General Mitchell International (MKE) sits south of Tippecanoe. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 55 dBA on the map's Overall layer. Blocks on the opposite side of Tippecanoe, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Tippecanoe

The bar chart below shows the share of Tippecanoe residents in each noise band. About 22% of residents live below the EPA's 55 dBA threshold, and roughly 10% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Tippecanoe Compares

Tippecanoe sits at the quieter end of the spectrum. Below: how Tippecanoe's average outdoor noise and share of residents above the EPA threshold compare with Town of Lake, Layton Park, Murray Hill, and Clarke Square.

Average noise level (dBA)

Tippecanoe's 57.5 dBA pop-weighted average is at the quieter end of the spectrum. Wisconsin as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Tippecanoe because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 66.9% of Tippecanoe residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 70.7% of Tippecanoe's footprint sits above 55 dBA, against a Wisconsin average of 29.6% and a national average of 28.1%.

What This Means if You're Moving to Tippecanoe

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from E Howard Ave and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 13% of Tippecanoe is under tree cover (about average for neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. General Mitchell International's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.