Noise Levels in Tisch Mills, WI | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across Tisch Mills
Quiet office
38
Residents above the EPA 55 dBA threshold
10% of Tisch Mills residents
64 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across Tisch Mills at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Tisch Mills, WI Map of Noise Levels in Tisch Mills
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 38 Tisch Mills residents, or 10.1%, live above that level. By land area, 10.3% of Tisch Mills is above 55 dBA.

See how noise in Tisch Mills compares to similar-sized cities.

Noise by Part of Tisch Mills

Average noise levels for Tisch Mills residents, grouped by direction from the center of Tisch Mills. Northern Tisch Mills carries the highest population-weighted average; Western Tisch Mills carries the lowest. Just 10% of residents in Western Tisch Mills live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Northern Tisch Mills.

Central Tisch Mills

48.9 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Eastern Tisch Mills

49.1 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Northern Tisch Mills

49.1 dBA · Mostly quiet
Quiet office

13% of people above 55 dBA

QuietLoud

Southern Tisch Mills

47.9 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Western Tisch Mills

47.7 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Northern Tisch Mills sounds about 10% louder than Western Tisch Mills to the human ear, a 1.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Nuclear Rd do you need to be?

Nuclear Rd produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
55 dBA
Quiet office to normal conversation
165 ft
41 dBA
Soft rainfall
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 52% of Tisch Mills sits under tree canopy (heavier than most cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Tisch Mills

The bar chart below shows the share of Tisch Mills residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Tisch Mills Compares

Tisch Mills sits the highest among the peer group. Below: how Tisch Mills's average outdoor noise and share of residents above the EPA threshold compare with Two Creeks, Pilsen, Slovan, and Neuern.

Average noise level (dBA)

Tisch Mills's 48.4 dBA pop-weighted average is the highest among the peer group. Wisconsin as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Tisch Mills because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 10.1% of Tisch Mills residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 10.3% of Tisch Mills's footprint sits above 55 dBA, against a Wisconsin average of 29.6% and a national average of 28.1%.

What This Means if You're Moving to Tisch Mills

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Nuclear Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 52% of Tisch Mills is under tree cover (heavier than most cities), and the dominant land cover is woody wetlands. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.