Noise Levels in Triadelphia, WV | Find Quiet Neighborhoods With Our Sound Map

47 dBA
Average noise across Triadelphia
Quiet office
423
Residents above the EPA 55 dBA threshold
13% of Triadelphia residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Triadelphia at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Triadelphia, WV Map of Noise Levels in Triadelphia
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 423 Triadelphia residents, or 13.4%, live above that level. By land area, 34.0% of Triadelphia is above 55 dBA.

See how noise in Triadelphia compares to similar-sized cities.

Noise by Part of Triadelphia

Average noise levels for Triadelphia residents, grouped by direction from the center of Triadelphia. Southern Triadelphia carries the highest population-weighted average; Eastern Triadelphia carries the lowest. Just 7% of residents in Eastern Triadelphia live in blocks above the EPA's 55 dBA threshold, a third of the share in Southern Triadelphia.

Central Triadelphia

47.1 dBA · Mostly quiet
Quiet office

4% of people above 55 dBA

QuietLoud

Eastern Triadelphia

43.2 dBA · Quiet
Quiet suburban street at night

7% of people above 55 dBA

QuietLoud

Northern Triadelphia

44.2 dBA · Quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

Southern Triadelphia

51.9 dBA · Moderate
Quiet office to normal conversation

27% of people above 55 dBA

QuietLoud

Western Triadelphia

45.4 dBA · Mostly quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Southern Triadelphia sounds about 83% louder than Eastern Triadelphia to the human ear, a 8.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Triadelphia using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-70 Interstate 73.2 76
National Rd Minor arterial 56.3 61
Mccutcheon Rd Local 59.2 61
Chapel Hill Rd Local 57.4 58
Dallas Pike Major collector 56.4 58

How far back from I-70 do you need to be?

I-70 produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
76 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
59 dBA
Normal conversation an arm’s length away
660 ft
52 dBA
Quiet office to normal conversation
¼ mile
46 dBA
Quiet suburban street at night
½ mile
40 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 46% of Triadelphia sits under tree canopy (heavier than most cities) and roughly 11% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Triadelphia

The bar chart below shows the share of Triadelphia residents in each noise band. About 86% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Triadelphia Compares

Triadelphia sits at the louder end of the spectrum. Below: how Triadelphia's average outdoor noise and share of residents above the EPA threshold compare with Bethlehem, Glen Dale, Colliers, and West Liberty.

Average noise level (dBA)

Triadelphia's 47.4 dBA pop-weighted average is at the louder end of the spectrum. West Virginia as a whole averages 47.7 dBA and the U.S. averages 52.0 dBA. Both are lower than Triadelphia because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 13.4% of Triadelphia residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 34.0% of Triadelphia's footprint sits above 55 dBA, against a West Virginia average of 21.6% and a national average of 28.1%.

What This Means if You're Moving to Triadelphia

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-70 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 46% of Triadelphia is under tree cover (heavier than most cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.