Noise Levels in Van Buren, AR | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across Van Buren
Quiet office to normal conversation
11,451
Residents above the EPA 55 dBA threshold
39% of Van Buren residents
81 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Van Buren at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Van Buren, AR Map of Noise Levels in Van Buren
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 11,451 Van Buren residents, or 39.4%, live above that level. By land area, 48.2% of Van Buren is above 55 dBA.

See how noise in Van Buren compares to similar-sized cities.

Noise by Part of Van Buren

Average noise levels for Van Buren residents, grouped by direction from the center of Van Buren. Western Van Buren carries the highest population-weighted average; Northern Van Buren carries the lowest. Just 16% of residents in Northern Van Buren live in blocks above the EPA's 55 dBA threshold, a third of the share in Western Van Buren.

Central Van Buren

54.6 dBA · Moderate-loud
Quiet office to normal conversation

37% of people above 55 dBA

QuietLoud

Eastern Van Buren

54.5 dBA · Moderate-loud
Quiet office to normal conversation

35% of people above 55 dBA

QuietLoud

Northern Van Buren

50.9 dBA · Moderate
Quiet office

16% of people above 55 dBA

QuietLoud

Southern Van Buren

56.0 dBA · Moderate-loud
Quiet office to normal conversation

51% of people above 55 dBA

QuietLoud

Western Van Buren

56.2 dBA · Moderate-loud
Normal conversation an arm’s length away

48% of people above 55 dBA

QuietLoud

Western Van Buren sounds about 44% louder than Northern Van Buren to the human ear, a 5.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Van Buren using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US Hwy 71 Interstate 71.7 76
I-40 Interstate 71.7 76
I-540 Interstate 71.8 75
N28thst Major collector 60.1 64
Riverfrontrd Local 59.0 60

How far back from US Hwy 71 do you need to be?

US Hwy 71 produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
76 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 30% of Van Buren sits under tree canopy (about average for cities) and roughly 20% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of Van Buren. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across Van Buren

The bar chart below shows the share of Van Buren residents in each noise band. About 51% of residents live below the EPA's 55 dBA threshold, and roughly 13% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Van Buren Compares

Van Buren sits at the quieter end of the spectrum. Below: how Van Buren's average outdoor noise and share of residents above the EPA threshold compare with Alma, Fort Smith, Greenwood, and Barling.

Average noise level (dBA)

Van Buren's 54.7 dBA pop-weighted average is at the quieter end of the spectrum. Arkansas as a whole averages 52.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Van Buren because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 39.4% of Van Buren residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 48.2% of Van Buren's footprint sits above 55 dBA, against a Arkansas average of 29.9% and a national average of 28.1%.

What This Means if You're Moving to Van Buren

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US Hwy 71 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 30% of Van Buren is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.